Singal relay location??? S13 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

roycenagger · 07-29-2007, 01:16 PM

Check for corrosion on the bulb contacts on both right and left front turn signals.

-Royce

attracted · 07-29-2007, 01:39 PM

ok dude....if you put your hazards on and it flashes normal speed but only the back flashes

then u put flashers and it flahses fast....its either the circuit or most likley the bulb that is burnt out...
those flasher relays dnt just burn.....

check the lights....
then check the ground
then just check the circuit.....

all things that dont cost money.....

theimportguy · 07-29-2007, 03:17 PM

Yep...turned out to be a bad bulb. There was corrosion around the bottom, and caused a whole in the bulb. had to replace both though cause one wasnt working properly.

Thanks for the help guys!

projectRDM · 07-30-2007, 09:15 AM

Just in case someone searches and finds this, the S13 flasher is located directly above the steering column, you have to drop it to gain access.

07-30-2007, 09:15 AM	#4
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Just in case someone searches and finds this, the S13 flasher is located directly above the steering column, you have to drop it to gain access. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-29-2007, 01:16 PM	#1
roycenagger Join Date: Dec 2001 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Check for corrosion on the bulb contacts on both right and left front turn signals. -Royce

07-29-2007, 01:39 PM	#2
attracted Leaky Injector Join Date: Sep 2005 Location: montreal Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	ok dude....if you put your hazards on and it flashes normal speed but only the back flashes then u put flashers and it flahses fast....its either the circuit or most likley the bulb that is burnt out... those flasher relays dnt just burn..... check the lights.... then check the ground then just check the circuit..... all things that dont cost money.....

07-29-2007, 03:17 PM	#3
theimportguy Leaky Injector Join Date: Jul 2005 Location: Saskatchewan, Canada Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	Yep...turned out to be a bad bulb. There was corrosion around the bottom, and caused a whole in the bulb. had to replace both though cause one wasnt working properly. Thanks for the help guys!