s13 sr into s14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Borund · 09-13-2007, 10:51 PM

I know this topic has been discussed before, but i can't seem to find any help anywhere. My question is, what all will i be needing to drop the s13 redtop into my s14?

I know i need motor mounts, radiator, what else do i need to change?

Any advice is greaty appreciated. Thanks

grnappletree14 · 09-14-2007, 01:02 AM

just the wiring harness pretty much, the motor drops in, u can upgrade the motor mounts if u want but not necessary, same goes with radiator, u just need to find 2 90* elbows and one straight pipe to make it work pretty simple

*fliprayzin240sx* · 09-14-2007, 01:14 AM

Harness is the most complicated part...have yet to find a dependable wiring harness instruction for S13 SR into a S14 chassis.

vvtisupra · 09-14-2007, 01:17 AM

use s13 pipes and everything. You'll need to cut your tray alittle for the intercooler pipes and some metal bands to bend to support your intercooler. Either use aftermarket bov or make sure you have the full bov set up on the intercooler. I blocked mine off andam using aftermarket its a lot easier. Also just get a aftermarket 1 peice aluminum hot pipe preferably with a bov falnged welded on it and a bov. Will make routing of pipes 10 times easier.

Borund · 09-14-2007, 10:10 AM

Ok Cool. Thanks guys that was alot of help! :] I'm planning on doing the swap this weekend

09-13-2007, 10:51 PM	#1
Borund BANNED Join Date: Jan 2007 Location: Fullerton CA Posts: 197 Trader Rating: (0) Feedback Score: 0 reviews	s13 sr into s14 I know this topic has been discussed before, but i can't seem to find any help anywhere. My question is, what all will i be needing to drop the s13 redtop into my s14? I know i need motor mounts, radiator, what else do i need to change? Any advice is greaty appreciated. Thanks

09-14-2007, 01:14 AM	#3
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Harness is the most complicated part...have yet to find a dependable wiring harness instruction for S13 SR into a S14 chassis. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

09-14-2007, 01:17 AM	#4
vvtisupra Nissanaholic! Join Date: Apr 2004 Location: SB and OC Posts: 2,118 Trader Rating: (16) Feedback Score: 16 reviews	use s13 pipes and everything. You'll need to cut your tray alittle for the intercooler pipes and some metal bands to bend to support your intercooler. Either use aftermarket bov or make sure you have the full bov set up on the intercooler. I blocked mine off andam using aftermarket its a lot easier. Also just get a aftermarket 1 peice aluminum hot pipe preferably with a bov falnged welded on it and a bov. Will make routing of pipes 10 times easier. __________________ http://www.fuckdrama.com/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-14-2007, 01:02 AM	#2
grnappletree14 BANNED Join Date: Aug 2006 Location: SOCAL/chino hills (909) Posts: 1,829 Trader Rating: (6) Feedback Score: 6 reviews	just the wiring harness pretty much, the motor drops in, u can upgrade the motor mounts if u want but not necessary, same goes with radiator, u just need to find 2 90* elbows and one straight pipe to make it work pretty simple

09-14-2007, 10:10 AM	#5
Borund BANNED Join Date: Jan 2007 Location: Fullerton CA Posts: 197 Trader Rating: (0) Feedback Score: 0 reviews	Ok Cool. Thanks guys that was alot of help! :] I'm planning on doing the swap this weekend