Tell me what u guys think

[Z33dori]

Just a thought but would it be possible for use to get a sticky thread(s) with every ones diff motor set ups.

every one could post their current engine set up w/ supporting mods and dyno'd hp and maybe a chart if u have it. i think this would b a great help to those who are looking for guidance to build a motor.

example:

Engine: Stock s14 blacktop swap (with variable cam timing), Greddy IM, Apexi metal headgasket, arp headstuds

Mods: DC sports manifold, gt2871r .86a/r, 3" dp, 3" exhaust, no cat, precision 780cc injectors, walbro 255lph HP pump, Greddy front mount, greddy charge pipes, greddy bov, Z32 MAF, Apexi Boost solenoid kit, Apexi Power FC Ljetro

Tuning at 12psi and 17psi on 93 octane: 375whp / 350tq



im sure most of you will notice, yes this is from evans tuning. I have found their setup very useful for studying what i want to plan for my SR build. But i figure it would help to have it here with a much larger community of just nissans. we could have one big thread with all of them or separate threads for diff motors (Ka-t, SR, RB, vq, etc). tell me what u guys think.

[johngriff]

Should probably add an engine tuning forum and suspension tuning forum.

If you just post how much power output you want, over what power band for a specific type of sport, I could tell you off the top of my head what to do.

[Z33dori]

350-400whp

quick spool....

[Z33dori]

no one likes idea???

[johngriff]

9/1 comp
hks 264 step II cams
bottom mount 2871r
or
top mount 3071r
good oil pump
oil cooler
radiator
valve springs
cold spark plugs.
Good management.

[cleantune]

I think its a good idea! New forum on car setups.

[dre]

i think thats a good idea cuze i wanted that and i had to ask ppl at stores wat thay think and u know they always just want ur money

[Kouki]

So what size injectors? with 2871r what a/r 64 or 86? How much difference in spoolup is there betweent the 2?

Originally Posted by johngriff

9/1 comp
hks 264 step II cams
bottom mount 2871r
or
top mount 3071r
good oil pump
oil cooler
radiator
valve springs
cold spark plugs.
Good management.

[Z33dori]

can the GT2871r be run as a top mount....

[Kouki]

You can probably find a top mount mani with a t2 flange, but if you're gonna spend the money doing a top mount, you should just get a 3071 and have close to the same spool time, and higher power possibilities.

[Z33dori]

so peak boost /hybrid dynamics top mount manifold with a GT3071R .86 AR

one more question are there any aftermarket camshafts that allow you to keep the VTC(valve timing) on the S14 SR or would it be better to just get a blacktop S13 SR.