Ignited Push button start into S13 troubles - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

deesz · 11-28-2007, 10:49 PM

just so yuo know the wire colors do change at the ignition harness so dont fallow what people say make sure you test the wires. use a dvom, u dont have an airbag so you could use a test light.
check to see which one has 12v when the key is fully turned
you will have two starter wires and you will have to send 12 volts to both of them

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-28-2007, 10:49 PM	#1
deesz Leaky Injector Join Date: Nov 2007 Location: nor cal Age: 39 Posts: 110 Trader Rating: (0) Feedback Score: 0 reviews	just so yuo know the wire colors do change at the ignition harness so dont fallow what people say make sure you test the wires. use a dvom, u dont have an airbag so you could use a test light. check to see which one has 12v when the key is fully turned you will have two starter wires and you will have to send 12 volts to both of them