Really really hard to find Skyline parts... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

opponheimer · 12-10-2007, 06:26 PM

I need to know if any parts below are interchangeable with any USDM parts, and/or if anyone has a connection/hookup and may be able to help me find someone who can locate the following parts.

I don't think this has been touched on, but this thread may be useful for people down the road in the archives..

Doing a R34 GTT Neo Rb25DET swap in an s13 fastback. The drive train utilizes a PULL-Type clutch. My friend bought the motor from drift freaq who supposedly got the motor from a front clip... Surprisingly a few key parts are missing which are disabling us from completing the swap.

- The pin/C-clip combo that holds the clutch fork on the inside of the bell housing for clutch engage/disengagement.
(this would mean that the transmission was removed, and the pin taken off, and I guess lost, by drift freaq or whoever had worked on the engine set.)

- Clutch slave cylinder for the same transmission.

- OEM rb25det shifter.

If anyone can help, I'd greatly, greatly appreciate it, have been looking for a month now, not much luck, a lot of dead leads.

worangejuice · 12-10-2007, 06:30 PM

rbmotoring.com
rbmotorsports.com

LB.Motoring · 12-10-2007, 06:31 PM

I believe the shifter is the same as, Ka, Sr etc.

opponheimer · 12-10-2007, 06:37 PM

Quote:

Originally Posted by LB.Motoring

I believe the shifter is the same as, Ka, Sr etc.

Some aussies on skylineaustralia said it wasn't but it may be same as a 300zx..

possi rep to you and worangejuice, thanks for the quick replies

Just searched through two skyline fsms, found nothing.

Parts are from an 1998-2000 Skyline GTT ER34 Neo

syline · 12-10-2007, 08:01 PM

try rhdjapan.com give em a call they can usually find stuff.

Lith · 12-10-2007, 08:07 PM

www.jdmspeedshop.com
Contact Daryl ([email protected]) and ask him to ship you the part. That's how I got my R33 GTS-T e-brake lines that I needed for my S14 and the 300zx e-brake assembly.

If you know the exact part number, then it would be very easy to order. He's a Skyline fan, and I'm sure he will be happy to help

opponheimer · 12-10-2007, 08:13 PM

Quote:

Originally Posted by Lith

www.jdmspeedshop.com
Contact Daryl ([email protected]) and ask him to ship you the part. That's how I got my R33 GTS-T e-brake lines that I needed for my S14 and the 300zx e-brake assembly.

If you know the exact part number, then it would be very easy to order. He's a Skyline fan, and I'm sure he will be happy to help

I just emailed him, thanks +1 to you

Slammed180 · 12-10-2007, 08:30 PM

http://theskylineshop.com/

You can try them, too.

opponheimer · 12-11-2007, 07:23 PM

There was no luck from any of the above. :/

heychris · 12-11-2007, 07:41 PM

try www.driftwerks.co.uk or www.powervehicles.com
lotsa skyline drifters and or links there...

bardabe · 12-11-2007, 07:58 PM

shifter is RB25 - 26 only u can't use a 300ZX one sorry, the slave cylinder is pretty much RB26 compatible. so any RB26 tranny slave will work. R33 RB26 use Pull Type clutches so im sure u can get TOB kit for that u'll be gravy. try contacting mynismoshop.com or COurtesyparts.com

opponheimer · 12-13-2007, 01:29 PM

I think the clutch slave is for an altima glx, just orderd one from advanced, we'll see. Anyone know of anyone else i could contact?

DOOK · 12-13-2007, 01:32 PM

how about any of our supporting members in japan who can pull parts from a donor over there or hit up a parts store... have you tried that?

12-10-2007, 06:26 PM	#1
opponheimer Zilvia FREAK! Join Date: Apr 2007 Location: Bikini Atoll Posts: 1,267 Trader Rating: (3) Feedback Score: 3 reviews	Really really hard to find Skyline parts... I need to know if any parts below are interchangeable with any USDM parts, and/or if anyone has a connection/hookup and may be able to help me find someone who can locate the following parts. I don't think this has been touched on, but this thread may be useful for people down the road in the archives.. Doing a R34 GTT Neo Rb25DET swap in an s13 fastback. The drive train utilizes a PULL-Type clutch. My friend bought the motor from drift freaq who supposedly got the motor from a front clip... Surprisingly a few key parts are missing which are disabling us from completing the swap. - The pin/C-clip combo that holds the clutch fork on the inside of the bell housing for clutch engage/disengagement. (this would mean that the transmission was removed, and the pin taken off, and I guess lost, by drift freaq or whoever had worked on the engine set.) - Clutch slave cylinder for the same transmission. - OEM rb25det shifter. If anyone can help, I'd greatly, greatly appreciate it, have been looking for a month now, not much luck, a lot of dead leads. __________________ SR20 & RB20/25/26 in s13/s14 Wiring from $125 to $200.. Best prices EVER.

12-10-2007, 06:30 PM	#2
worangejuice Zilvia FREAK! Join Date: Nov 2005 Location: WeeeHoooo,CA Age: 45 Posts: 1,519 Trader Rating: (10) Rides Gallery: worangejuice Feedback Score: 10 reviews	rbmotoring.com rbmotorsports.com __________________

12-10-2007, 06:31 PM	#3
LB.Motoring Post Whore! Join Date: Jul 2006 Location: SòCal♥ Age: 38 Posts: 5,840 Trader Rating: (1) Rides Gallery: LB.Motoring Feedback Score: 1 reviews	I believe the shifter is the same as, Ka, Sr etc. __________________ Robby Leuer

12-11-2007, 07:23 PM	#9
opponheimer Zilvia FREAK! Join Date: Apr 2007 Location: Bikini Atoll Posts: 1,267 Trader Rating: (3) Feedback Score: 3 reviews	There was no luck from any of the above. :/ __________________ SR20 & RB20/25/26 in s13/s14 Wiring from $125 to $200.. Best prices EVER.

12-11-2007, 07:58 PM	#11
bardabe Post Whore! Join Date: Aug 2005 Location: SoCal Age: 35 Posts: 4,719 Trader Rating: (10) Rides Gallery: bardabe Feedback Score: 10 reviews	shifter is RB25 - 26 only u can't use a 300ZX one sorry, the slave cylinder is pretty much RB26 compatible. so any RB26 tranny slave will work. R33 RB26 use Pull Type clutches so im sure u can get TOB kit for that u'll be gravy. try contacting mynismoshop.com or COurtesyparts.com __________________ Review Thread

12-10-2007, 08:01 PM	#5
syline Join Date: Nov 2007 Location: dfw Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	try rhdjapan.com give em a call they can usually find stuff.

12-10-2007, 08:07 PM	#6
Lith Zilvia Member Join Date: Feb 2005 Location: NYC Posts: 153 Trader Rating: (0) Feedback Score: 0 reviews	www.jdmspeedshop.com Contact Daryl ([email protected]) and ask him to ship you the part. That's how I got my R33 GTS-T e-brake lines that I needed for my S14 and the 300zx e-brake assembly. If you know the exact part number, then it would be very easy to order. He's a Skyline fan, and I'm sure he will be happy to help

12-10-2007, 08:30 PM	#8
Slammed180 Zilvia FREAK! Join Date: Oct 2007 Location: Calgary, Canada Age: 38 Posts: 1,445 Trader Rating: (1) Feedback Score: 1 reviews	http://theskylineshop.com/ You can try them, too.

12-11-2007, 07:41 PM	#10
heychris Zilvia Addict Join Date: Oct 2007 Location: SkiTown USA Posts: 760 Trader Rating: (20) Feedback Score: 20 reviews	try www.driftwerks.co.uk or www.powervehicles.com lotsa skyline drifters and or links there...

12-13-2007, 01:29 PM	#12
opponheimer Zilvia FREAK! Join Date: Apr 2007 Location: Bikini Atoll Posts: 1,267 Trader Rating: (3) Feedback Score: 3 reviews	I think the clutch slave is for an altima glx, just orderd one from advanced, we'll see. Anyone know of anyone else i could contact? __________________ SR20 & RB20/25/26 in s13/s14 Wiring from $125 to $200.. Best prices EVER.

12-13-2007, 01:32 PM	#13
DOOK Post Whore! Join Date: May 2007 Location: Land of Milk and Cookies Age: 42 Posts: 7,552 Trader Rating: (3) Feedback Score: 3 reviews	how about any of our supporting members in japan who can pull parts from a donor over there or hit up a parts store... have you tried that? __________________ <------ Grumpy Old Asshole MY REVIEW THREAD: Ltdnismoracer4=DOOK http://www.zilvia.net/f/showthread.p...ltdnismoracer4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode