help me pick a light wheel - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

4bangers · 01-09-2008, 12:28 AM

I think citytireonline.com has some tire weight, but they don't have every tires though.

So RPF1 it is then. However, will +35mm offset OK on a S13 hatch without hitting the KTS coil and suspension arms? I trying not to hit the suspension nor the fender.

So the RPF1 has larger hub bore then 240sx, does the hubring fix that?

drift freaq · 01-09-2008, 12:44 AM

Quote:

Originally Posted by 4bangers

I think citytireonline.com has some tire weight, but they don't have every tires though.

So RPF1 it is then. However, will +35mm offset OK on a S13 hatch without hitting the KTS coil and suspension arms? I trying not to hit the suspension nor the fender.

So the RPF1 has larger hub bore then 240sx, does the hubring fix that?

+35mm is a terrible offset. If your running a 17x9 you could run a +17-25 without hitting the KTS. I ran KTS with +30mm on 17x7.5 and 17x9 no hitting and you could go lower on the offset without scraping your fenders. Plus a roll and pull is not a big deal. I run 17x9 +12 57 MAX's now and I rolled and pulled with some decamber and its not a problem.

By the way 57 MAX's rock over the kosei's or the Enkei's

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-09-2008, 12:28 AM	#1
4bangers Zilvia Junkie Join Date: Nov 2007 Location: wa Age: 26 Posts: 367 Trader Rating: (3) Feedback Score: 3 reviews	I think citytireonline.com has some tire weight, but they don't have every tires though. So RPF1 it is then. However, will +35mm offset OK on a S13 hatch without hitting the KTS coil and suspension arms? I trying not to hit the suspension nor the fender. So the RPF1 has larger hub bore then 240sx, does the hubring fix that?