Car rolls forward while in 1st gear with clutch pedal down! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

xsparc · 01-30-2008, 12:03 PM

I had the exact same problem about 2 years ago. turned out my fork was sticking what i put the clutch in so when i pressed the pedal everything looked right but for the first 3/4in the fork wasnt even contacting the pressure plate. so what i did was pushed the fork against the pressure plate and held it there while i beld the slave out. a vaccuum bleeder works great for this. after i did that i havnt had a problem since.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-30-2008, 12:03 PM	#30
xsparc Zilvia Junkie Join Date: Dec 2002 Location: san diego area - esco Posts: 461 Trader Rating: (0) Feedback Score: 0 reviews	I had the exact same problem about 2 years ago. turned out my fork was sticking what i put the clutch in so when i pressed the pedal everything looked right but for the first 3/4in the fork wasnt even contacting the pressure plate. so what i did was pushed the fork against the pressure plate and held it there while i beld the slave out. a vaccuum bleeder works great for this. after i did that i havnt had a problem since.