T5 Stang Tranny Conversion (Cable Type) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

chnco · 03-26-2008, 09:58 AM

Well guys, I was wondering if I could get pointed in the right direction.

I have a 302 swapped S14, and was wondering what the best route for the tranny would be from the T5. The T5 tranny is a cable type and not a hydraulic type like 240's. I'm thinking that I could modify the existing pedal to accomodate the cable from the Stang motor. Or should I try using the stang pedals?

Thanks!!!

whereda40at · 03-26-2008, 06:34 PM

you should be able to make the tranny hydrolic.
i have a t-5 dog box in my s13 sr20. i use the bell housing off an sr and it is converted to hydrolic on the trans.

call g-force racing they should be able to tell you how to do it.

03-26-2008, 09:58 AM	#1
chnco Zilvia Member Join Date: Jun 2004 Location: Marietta, GA Posts: 208 Trader Rating: (0) Feedback Score: 0 reviews	T5 Stang Tranny Conversion (Cable Type) Well guys, I was wondering if I could get pointed in the right direction. I have a 302 swapped S14, and was wondering what the best route for the tranny would be from the T5. The T5 tranny is a cable type and not a hydraulic type like 240's. I'm thinking that I could modify the existing pedal to accomodate the cable from the Stang motor. Or should I try using the stang pedals? Thanks!!!

03-26-2008, 06:34 PM	#2
whereda40at Zilvia FREAK! Join Date: Mar 2007 Location: where 240's are few and far between Age: 37 Posts: 1,039 Trader Rating: (3) Feedback Score: 3 reviews	you should be able to make the tranny hydrolic. i have a t-5 dog box in my s13 sr20. i use the bell housing off an sr and it is converted to hydrolic on the trans. call g-force racing they should be able to tell you how to do it. __________________ WORLDS FASTEST T-2 TURBO 240 ON 93 OCTANE! 10.79 @ 124 MPH WITH A 1.48 60'

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode