T25 Turbo Rebuild - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Pakua · 04-20-2008, 06:41 PM

Great write up. Did you balance the whole shaft assembly or just install the old better condition one in. If I remember correctly the whole assembly should be balanced as to insure the assembly doesn't cause excessive wear caused from the vibrations.

clark · 04-20-2008, 07:46 PM

Quote:

Originally Posted by Pakua

Great write up. Did you balance the whole shaft assembly or just install the old better condition one in. If I remember correctly the whole assembly should be balanced as to insure the assembly doesn't cause excessive wear caused from the vibrations.

naw, i didn't balance shit..i didn't even mark them. i actually used the exhaust turbine and shaft from the original turbo, and the intake compressor from the 2nd one i got. so it's completely off balance. i don't exactly plan on running this setup for too long.

plus it's gonna be a few weeks before i even install this turbo so maybe i can find a shop to balance the asssy.

thanks for the reps guys!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-20-2008, 06:41 PM	#1
Pakua Leaky Injector Join Date: Nov 2006 Location: Pasadena Posts: 86 Trader Rating: (9) Feedback Score: 9 reviews	Great write up. Did you balance the whole shaft assembly or just install the old better condition one in. If I remember correctly the whole assembly should be balanced as to insure the assembly doesn't cause excessive wear caused from the vibrations.