sr20det swap wiring problem, Need expert/installer help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

turboex · 02-18-2003, 02:07 AM

Well my problem was that cause the sr and car harness both have sockets i decided to cut of the one on the old harness. When i matched up the colors on the remaining end of the ka harness and the sr harness the wire did not match. Well come to find out i need to match the wires toe the car side of the wiring as the wires change color when they go through the plugs. Does this make sense?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-18-2003, 02:07 AM	#1
turboex Zilvia Member Join Date: Oct 2002 Location: minot ND Posts: 252 Trader Rating: (0) Feedback Score: 0 reviews	Well my problem was that cause the sr and car harness both have sockets i decided to cut of the one on the old harness. When i matched up the colors on the remaining end of the ka harness and the sr harness the wire did not match. Well come to find out i need to match the wires toe the car side of the wiring as the wires change color when they go through the plugs. Does this make sense?