SR Turbo Intake Nipples - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drkidd22 · 04-25-2008, 08:45 AM

Hey Guys,

I put an intake in the other day and I'm left with two nipples on it on the open. So I think is for a recirculating BOV or something but here is a pic.

Thanks

SHIFT_*grind* · 04-25-2008, 09:10 AM

The one on the right could be for your BOV recirc, or catch can (whichever isn't already attached to the bung you didn't circle). The circled bung on the left...don't know what that one's for. Plug it with a vacuum cap if you don't need it.

Is that a K&N brand intake pipe, or something else?

Also, what's that filter part #? Did it come with the MAF intake pipe adapter?

clark · 04-25-2008, 09:23 AM

that's a vac linie for your WG actuator or boost controller. that's pretty cool it has a nipple on it.

EDIT: oh crap, it's pre-turbo, no boost source, i'm retarded

blueshark123 · 04-25-2008, 09:24 AM

i would rather plug it up then use it as a vaccum source

drkidd22 · 04-25-2008, 10:07 AM

Yeah. The kit came just like that. The only problem with it is that the adapter to the K&N filter is for the SR Stock MAF. I'm using the SOHC maf from the KA and had to drill some holes to adap it. I don't have a BOV so can I just seal the other nipple?

drkidd22 · 04-25-2008, 10:14 AM

Quote:

Originally Posted by SHIFT_*grind*

The one on the right could be for your BOV recirc, or catch can (whichever isn't already attached to the bung you didn't circle). The circled bung on the left...don't know what that one's for. Plug it with a vacuum cap if you don't need it.

Is that a K&N brand intake pipe, or something else?

Also, what's that filter part #? Did it come with the MAF intake pipe adapter?

Just the filter is K&N

drkidd22 · 04-25-2008, 10:15 AM

Quote:

Originally Posted by blueshark123

i would rather plug it up then use it as a vaccum source

Can you elaborate a little on that? Source for like what?

Thanks.

180sxLove · 04-25-2008, 11:20 AM

just plug the small bung.. you don't need it. the other one is the for the intake hose running from the stock catch can setup.. You can either use it the way it was intended to be ran from the factory or use it as a opportunity to recirculate your BOV to it and figure out another setup for your catch can..

hope this helps

04-25-2008, 08:45 AM	#1
drkidd22 BANNED Join Date: Jun 2007 Location: USA Age: 39 Posts: 146 Trader Rating: (0) Feedback Score: 0 reviews	SR Turbo Intake Nipples Hey Guys, I put an intake in the other day and I'm left with two nipples on it on the open. So I think is for a recirculating BOV or something but here is a pic. Thanks

04-25-2008, 09:10 AM	#2
SHIFT_grind Nissanaholic! Join Date: Nov 2004 Location: NWA Age: 42 Posts: 2,066 Trader Rating: (7) Feedback Score: 7 reviews	The one on the right could be for your BOV recirc, or catch can (whichever isn't already attached to the bung you didn't circle). The circled bung on the left...don't know what that one's for. Plug it with a vacuum cap if you don't need it. Is that a K&N brand intake pipe, or something else? Also, what's that filter part #? Did it come with the MAF intake pipe adapter? __________________ My seller review thread

04-25-2008, 09:23 AM	#3
clark Zilvia FREAK! Join Date: Mar 2008 Location: new york Posts: 1,035 Trader Rating: (1) Feedback Score: 1 reviews	that's a vac linie for your WG actuator or boost controller. that's pretty cool it has a nipple on it. EDIT: oh crap, it's pre-turbo, no boost source, i'm retarded Last edited by clark; 04-25-2008 at 09:54 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-25-2008, 09:24 AM	#4
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	i would rather plug it up then use it as a vaccum source

04-25-2008, 10:07 AM	#5
drkidd22 BANNED Join Date: Jun 2007 Location: USA Age: 39 Posts: 146 Trader Rating: (0) Feedback Score: 0 reviews	Yeah. The kit came just like that. The only problem with it is that the adapter to the K&N filter is for the SR Stock MAF. I'm using the SOHC maf from the KA and had to drill some holes to adap it. I don't have a BOV so can I just seal the other nipple?

04-25-2008, 11:20 AM	#8
180sxLove Leaky Injector Join Date: Mar 2007 Location: Eugene, OR Age: 38 Posts: 141 Trader Rating: (0) Feedback Score: 0 reviews	just plug the small bung.. you don't need it. the other one is the for the intake hose running from the stock catch can setup.. You can either use it the way it was intended to be ran from the factory or use it as a opportunity to recirculate your BOV to it and figure out another setup for your catch can.. hope this helps