1989 hatch stereo wiring - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

g6civcx · 05-14-2008, 12:33 PM

Take it to Best Buy. Pay them $50 to install. Let them deal with wiring.

If you're anal, after you go home, take out the deck and solder the wires together instead of using connectors.

Otherwise, bust out the FSM-EL section and read the stereo wiring section. Follow the wire colours and match to your deck. You can use a harness, or clip off the OEM harness and solder.

I recommend using a detachable harness. Crutchfield sells one for about $10-15. It makes it easier to change decks later. Plus it's easier to solder out of the car than in the car.

There is a soldering thread in Tech. If you have any specific questions about colours, post up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

05-14-2008, 12:33 PM	#5
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Take it to Best Buy. Pay them $50 to install. Let them deal with wiring. If you're anal, after you go home, take out the deck and solder the wires together instead of using connectors. Otherwise, bust out the FSM-EL section and read the stereo wiring section. Follow the wire colours and match to your deck. You can use a harness, or clip off the OEM harness and solder. I recommend using a detachable harness. Crutchfield sells one for about $10-15. It makes it easier to change decks later. Plus it's easier to solder out of the car than in the car. There is a soldering thread in Tech. If you have any specific questions about colours, post up.