Rear Main Seal/Retainer - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

deviousKA · 03-11-2003, 12:03 PM

i dont know which engine you have but coming from 22re, z24i, ka24e, and vg30 experience maybe i can help you out. its going to be a pain if the engine is in the car but you probably already know that. there should be bolts on the back of the block side, and bolts that come up from the oil pan. it should be simple to knock out if you have the oil pan off. ive never tried with a pan on but you may be able to do it, if you get it out, the hard part will be trying to fit it in there with the oil pan gasket, actually i doubt this is even possible. lift your engine up to get some room and take your pan off, it will be worth the extra work

Edit: i read you have dohc KA, should be same as ka24e correct me if im wrong

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-11-2003, 12:03 PM	#3
deviousKA Zilvia Junkie Join Date: Jan 2003 Location: Idaho Posts: 437 Trader Rating: (0) Feedback Score: 0 reviews	i dont know which engine you have but coming from 22re, z24i, ka24e, and vg30 experience maybe i can help you out. its going to be a pain if the engine is in the car but you probably already know that. there should be bolts on the back of the block side, and bolts that come up from the oil pan. it should be simple to knock out if you have the oil pan off. ive never tried with a pan on but you may be able to do it, if you get it out, the hard part will be trying to fit it in there with the oil pan gasket, actually i doubt this is even possible. lift your engine up to get some room and take your pan off, it will be worth the extra work Edit: i read you have dohc KA, should be same as ka24e correct me if im wrong