New Japanese brand's debut in the USA: Parts Shop MAX - Page 67 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

VIPDRFT · 08-04-2008, 02:13 PM

I just wanted to say how awesome your coilovers are! I recently installed them on my S13 and participated in a Midnight Madness/DriftSTL event @ Gateway International Raceway Friday night. I was killing it! Fast entries, smooth transitions, and I could put my foot down. The car was also extemely predictable. Much better than my old shocks & springs. Expect me to buy more of your parts in the future.

DC Dan MAX USA · 08-05-2008, 03:19 PM

Quote:

Originally Posted by VIPDRFT

I just wanted to say how awesome your coilovers are! I recently installed them on my S13 and participated in a Midnight Madness/DriftSTL event @ Gateway International Raceway Friday night. I was killing it! Fast entries, smooth transitions, and I could put my foot down. The car was also extemely predictable. Much better than my old shocks & springs. Expect me to buy more of your parts in the future.

Glad you had a great time with our coilovers.
hit us up when your ready for more stuff.

The ROMAN · 08-05-2008, 06:05 PM

Quote:

Originally Posted by DC Dan MAX USA

They are availible for $200 and we build them when you order them...
check the website ::Powered by MAX::

Awesome, so these are the version 2? I sent you a pm but I would like a quote for the hand brake and earls lines to 07757. Thanks!

Nacho_240 · 08-06-2008, 04:25 AM

Quote:

Originally Posted by DC Dan MAX USA

I dont think so.
1 dp, 1spin knob, and TRAS = $30 shipped.

Payment sent to [email protected] for the following

magnetic drain plug
black spin turn knob
tie rod spacers

Let me know if you don't get my shipping address through paypal.

wntrcoatblu240 · 08-06-2008, 05:21 AM

hey did you guys get more coilovers in?! for the s13?! i have money ready... i've been waiting for like 2 months now.. lol...

bryce with a y · 08-06-2008, 06:54 AM

version 2 toe rods in?

VIPDRFT · 08-06-2008, 06:56 AM

Quote:

Originally Posted by wntrcoatblu240

hey did you guys get more coilovers in?! for the s13?! i have money ready... i've been waiting for like 2 months now.. lol...

I bought mine used.

DC Dan MAX USA · 08-06-2008, 04:12 PM

Quote:

Originally Posted by bryce with a y

version 2 toe rods in?

they will be here soon... maybe a week.

Quote:

Originally Posted by wntrcoatblu240

hey did you guys get more coilovers in?! for the s13?! i have money ready... i've been waiting for like 2 months now.. lol...

you can pre-order if you would like... but we will have them very soon along with the version2 toe rods.

Quote:

Originally Posted by Nacho_240

Payment sent to [email protected] for the following

magnetic drain plug
black spin turn knob
tie rod spacers

Let me know if you don't get my shipping address through paypal.

got it and they were sent out. thanks.

DC Dan MAX USA · 08-06-2008, 04:12 PM

Quote:

Originally Posted by The ROMAN

Awesome, so these are the version 2? I sent you a pm but I would like a quote for the hand brake and earls lines to 07757. Thanks!

yes, those are the version 2 ruca's .

sil80dreamer · 08-06-2008, 09:34 PM

Do you have any S13 intercooler kits in?

The ROMAN · 08-06-2008, 10:11 PM

Quote:

Originally Posted by DC Dan MAX USA

yes, those are the version 2 ruca's .

I was talking about the hand brake. I wanted to order one but you said V.1 was done and V.2 was in development. Anyways, if the hydro-brakes are available I'd like to order one plus the s.s. lines for it to 07757.

AWDalbert · 08-06-2008, 10:45 PM

I e-mailed you guys about that fender roller i would like to go pickup if thats ok, when are your store hours???

scribbles6 · 08-07-2008, 12:31 AM

i installed my version 2 rucason my s13 last week, and they look sexy and make titties bounce (in addition to the PBM coilovers), i just haven't got an alignment yet lol. but i'm itchin to buy some more stuff from you guys, just a little broke.

in a few weeks tho, i'm looking to pick up tension roda and maybe traction ones too.

Z33dori · 08-07-2008, 12:58 AM

Dan... are you guys still selling Hicas bars...

or do i have to order it from Japan

DC Dan MAX USA · 08-07-2008, 01:46 PM

Quote:

Originally Posted by sil80dreamer

Do you have any S13 intercooler kits in?

Intercooler only is in stock and runs $250. pipe kit is out of stock & I have none on order at this time.

Quote:

Originally Posted by The ROMAN

I was talking about the hand brake. I wanted to order one but you said V.1 was done and V.2 was in development. Anyways, if the hydro-brakes are available I'd like to order one plus the s.s. lines for it to 07757.

Gen II Hand brakes have now completed tests in the US and Japan and are ready to build. $200 for the standard hydro brake, $100 extra for the tension rod hydro brake, $75 for earls s.s. braided lines and fittings. $300 shipped to you for the standard version with earls parts.

Quote:

Originally Posted by AWDalbert

I e-mailed you guys about that fender roller i would like to go pickup if thats ok, when are your store hours???

M-F 10A-6P $200 picked up $215 shipped to you. I'll let you know when they arrive here sometime next week.

Quote:

Originally Posted by scribbles6

i installed my version 2 rucason my s13 last week, and they look sexy and make titties bounce (in addition to the PBM coilovers), i just haven't got an alignment yet lol. but i'm itchin to buy some more stuff from you guys, just a little broke.

in a few weeks tho, i'm looking to pick up tension roda and maybe traction ones too.

Indeed! the TD's do bounce with the competition suspension installed.

Quote:

Originally Posted by Z33dori

Dan... are you guys still selling Hicas bars...
or do i have to order it from Japan

PM'd U

Flipzide · 08-07-2008, 05:45 PM

Hey Dan, how much more adjustability does the V2 RUCA have compared to the V1?

I took my car for an alignment and I was told my passenger side ruca maxxed out and they couldnt get my car within -2 degrees of camber. I assumed this happened because my car has been in an accident. If i could get more adjustability out of a V2, i might be intrested in upgrading my RUCAs on my s14.

Also, I'm interested in picking up a fender roller.

DC Dan MAX USA · 08-07-2008, 06:38 PM

Gen II will work perfectly for you because it has alot more range to bring your camber towards the positive direction. Its designed it to work well when you slam the car real low, when you need to push the top out a lot to correct the camber, thats what our new ruca can handle.

I'll add you to the contact list for the fender roller.

Brian · 08-07-2008, 06:50 PM

skid plate skid plate

skid plate

final act · 08-07-2008, 07:52 PM

shipping for a set of s14 coils to 96707?

The ROMAN · 08-07-2008, 08:08 PM

Payment sent for hydro hand brake and lines! Can you let me know if it's going to take awhile to sent out (being built to order)??

I'm also having the same problem with my rucas, might there be an upgrade deal? Like just the revised hiem joint or something along those lines?

Thanks!

DC Dan MAX USA · 08-07-2008, 08:20 PM

Quote:

Originally Posted by Brian

skid plate

Aw man I told them to send it a long time ago but I know they must have forgot so Ima remind them to send it along with the bling bling H20/Air separator tanks they just got.

Quote:

Originally Posted by final act

shipping for a set of s14 coils to 96707?

$1140 shpped to HI, in stock now.

happy408 · 08-07-2008, 10:13 PM

are the s13 coils almost here yet?

DC Dan MAX USA · 08-08-2008, 01:36 PM

They are going to be here a little later than I thought, but at least I have a hard date now instead of guessing. The shipment including Coilovers, Wheel spacers, Gen II Toe rods, 6KG springs and some other stuff that will replenish dwindling stock sets sail on Aug. 13th. That would put them here first week september.
A separate earlier shipment of Gen II Fender Rollers, and Super angle knuckle kits will arrive at our warehouse Aug. 18th.
We are also doing a small package shipment of Oil pan guards for two people who have been waiting (there will be none left for stock) as well as some of the fancy new Gen II Water/Air separator tanks in a variety of colors. Those should come pretty quick through EMS.

The weak dollar and increasing global materials price means our costs have gone up on all these shipments. I will try to hold the retail pricing as long as I can afford, but dont be too suprised when all of our prices are up 10%. I appreciate all of the business we get here on Zilvia & appreciate everyones understanding of these global matters. These things are out of my control but I"ll always do my best for you guys!

If you saw an item you want to claim from the above list, just hit me with a Zip code and I'll get you a price quote. If you pre pay for anything, I'll guarantee it is secured at the regular low price and I'll reserve the part before it arrives and get it sent to you upon arrival.

Brian · 08-08-2008, 01:47 PM

Thanks Dan!

happy408 · 08-08-2008, 09:50 PM

first week of september

? if i want to make a preorder do i just send you payment?

The ROMAN · 08-09-2008, 11:35 AM

Can you let me know that you got the paypal for the hydro e-brake to 07757? and how long it will take to build? Thanks.

The ROMAN · 08-10-2008, 02:06 PM

Also I read the earlier post about the rucas needing the same number of threads on both adjusters, but what would you say is the minimum number of threads to have on both while still being safe? I've heard 4 is safe but that seems a little low to me.

forum04pl · 08-10-2008, 02:26 PM

Any eta on s13 FMIC setups?

JDMB0iKT · 08-10-2008, 07:37 PM

How much is the RUCAs for the S13 shipped to 95123? Thanks

240love · 08-10-2008, 11:15 PM

Hey dan i pmed you about some parts but i forgot to mention these were for an s13.. LMK Plz!

08-04-2008, 02:13 PM	#1981
VIPDRFT Zilvia Junkie Join Date: Dec 2007 Location: Osan, South Korea Age: 39 Posts: 338 Trader Rating: (2) Feedback Score: 2 reviews	I just wanted to say how awesome your coilovers are! I recently installed them on my S13 and participated in a Midnight Madness/DriftSTL event @ Gateway International Raceway Friday night. I was killing it! Fast entries, smooth transitions, and I could put my foot down. The car was also extemely predictable. Much better than my old shocks & springs. Expect me to buy more of your parts in the future. __________________ Holding it and...WHEEL POPS OFF! O^O^O

08-06-2008, 05:21 AM	#1985
wntrcoatblu240 Zilvia Member Join Date: Aug 2003 Location: bay area Posts: 180 Trader Rating: (0) Feedback Score: 0 reviews	hey did you guys get more coilovers in?! for the s13?! i have money ready... i've been waiting for like 2 months now.. lol... __________________

08-06-2008, 06:54 AM	#1986
bryce with a y Zilvia Junkie Join Date: Feb 2006 Location: MN Posts: 397 Trader Rating: (3) Feedback Score: 3 reviews	version 2 toe rods in? __________________ Image exceeds forum limits -Moderation

08-06-2008, 09:34 PM	#1990
sil80dreamer Zilvia Member Join Date: Feb 2005 Location: Watertown Posts: 267 Trader Rating: (1) Feedback Score: 1 reviews	Do you have any S13 intercooler kits in? __________________ If you bought or sold me something, please leave me some feedback here. http://zilvia.net/f/private-sellers/...80dreamer.html

08-07-2008, 12:58 AM	#1994
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 36 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	Dan... are you guys still selling Hicas bars... or do i have to order it from Japan __________________

08-06-2008, 10:45 PM	#1992
AWDalbert Zilvia Member Join Date: Jul 2008 Location: 909/951 CALI Posts: 234 Trader Rating: (0) Feedback Score: 0 reviews	I e-mailed you guys about that fender roller i would like to go pickup if thats ok, when are your store hours???

08-07-2008, 12:31 AM	#1993
scribbles6 Users Awaiting Email Confirmation Join Date: Jul 2006 Location: east bay! Age: 39 Posts: 211 Trader Rating: (5) Feedback Score: 5 reviews	i installed my version 2 rucason my s13 last week, and they look sexy and make titties bounce (in addition to the PBM coilovers), i just haven't got an alignment yet lol. but i'm itchin to buy some more stuff from you guys, just a little broke. in a few weeks tho, i'm looking to pick up tension roda and maybe traction ones too.

08-07-2008, 05:45 PM	#1996
Flipzide Nissanaholic! Join Date: Jan 2004 Location: San Diego, CA Posts: 2,011 Trader Rating: (5) Feedback Score: 5 reviews	Hey Dan, how much more adjustability does the V2 RUCA have compared to the V1? I took my car for an alignment and I was told my passenger side ruca maxxed out and they couldnt get my car within -2 degrees of camber. I assumed this happened because my car has been in an accident. If i could get more adjustability out of a V2, i might be intrested in upgrading my RUCAs on my s14. Also, I'm interested in picking up a fender roller. __________________ D-Street.net \| bcuison.wordpress.com

08-07-2008, 06:38 PM	#1997
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	Gen II will work perfectly for you because it has alot more range to bring your camber towards the positive direction. Its designed it to work well when you slam the car real low, when you need to push the top out a lot to correct the camber, thats what our new ruca can handle. I'll add you to the contact list for the fender roller. __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

08-07-2008, 06:50 PM	#1998
Brian Post Whore! Join Date: Jan 2003 Location: usa Posts: 12,840 Trader Rating: (54) Rides Gallery: Brian Feedback Score: 54 reviews	skid plate skid plate skid plate __________________ http://bhworld.wordpress.com/

08-07-2008, 07:52 PM	#1999
final act Zilvia Member Join Date: Aug 2003 Location: on earth Age: 41 Posts: 283 Trader Rating: (0) Feedback Score: 0 reviews	shipping for a set of s14 coils to 96707? __________________

08-07-2008, 08:08 PM	#2000
The ROMAN Zilvia Addict Join Date: Jul 2003 Location: NJ Age: 42 Posts: 730 Trader Rating: (2) Feedback Score: 2 reviews	Payment sent for hydro hand brake and lines! Can you let me know if it's going to take awhile to sent out (being built to order)?? I'm also having the same problem with my rucas, might there be an upgrade deal? Like just the revised hiem joint or something along those lines? Thanks!

08-07-2008, 10:13 PM	#2002
happy408 Leaky Injector Join Date: Jan 2007 Location: san jose Posts: 83 Trader Rating: (4) Feedback Score: 4 reviews	are the s13 coils almost here yet?

08-08-2008, 01:36 PM	#2003
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	They are going to be here a little later than I thought, but at least I have a hard date now instead of guessing. The shipment including Coilovers, Wheel spacers, Gen II Toe rods, 6KG springs and some other stuff that will replenish dwindling stock sets sail on Aug. 13th. That would put them here first week september. A separate earlier shipment of Gen II Fender Rollers, and Super angle knuckle kits will arrive at our warehouse Aug. 18th. We are also doing a small package shipment of Oil pan guards for two people who have been waiting (there will be none left for stock) as well as some of the fancy new Gen II Water/Air separator tanks in a variety of colors. Those should come pretty quick through EMS. The weak dollar and increasing global materials price means our costs have gone up on all these shipments. I will try to hold the retail pricing as long as I can afford, but dont be too suprised when all of our prices are up 10%. I appreciate all of the business we get here on Zilvia & appreciate everyones understanding of these global matters. These things are out of my control but I"ll always do my best for you guys! If you saw an item you want to claim from the above list, just hit me with a Zip code and I'll get you a price quote. If you pre pay for anything, I'll guarantee it is secured at the regular low price and I'll reserve the part before it arrives and get it sent to you upon arrival. __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business! Last edited by DC Dan MAX USA; 08-08-2008 at 02:26 PM..

08-08-2008, 01:47 PM	#2004
Brian Post Whore! Join Date: Jan 2003 Location: usa Posts: 12,840 Trader Rating: (54) Rides Gallery: Brian Feedback Score: 54 reviews	Thanks Dan! __________________ http://bhworld.wordpress.com/

08-08-2008, 09:50 PM	#2005
happy408 Leaky Injector Join Date: Jan 2007 Location: san jose Posts: 83 Trader Rating: (4) Feedback Score: 4 reviews	first week of september? if i want to make a preorder do i just send you payment?

08-09-2008, 11:35 AM	#2006
The ROMAN Zilvia Addict Join Date: Jul 2003 Location: NJ Age: 42 Posts: 730 Trader Rating: (2) Feedback Score: 2 reviews	Can you let me know that you got the paypal for the hydro e-brake to 07757? and how long it will take to build? Thanks.

08-10-2008, 02:06 PM	#2007
The ROMAN Zilvia Addict Join Date: Jul 2003 Location: NJ Age: 42 Posts: 730 Trader Rating: (2) Feedback Score: 2 reviews	Also I read the earlier post about the rucas needing the same number of threads on both adjusters, but what would you say is the minimum number of threads to have on both while still being safe? I've heard 4 is safe but that seems a little low to me.

08-10-2008, 02:26 PM	#2008
forum04pl Zilvia Junkie Join Date: Aug 2006 Location: boston Posts: 573 Trader Rating: (10) Feedback Score: 10 reviews	Any eta on s13 FMIC setups?

08-10-2008, 07:37 PM	#2009
JDMB0iKT Zilvia Addict Join Date: Aug 2005 Location: San Jose, CA Age: 34 Posts: 731 Trader Rating: (2) Rides Gallery: JDMB0iKT Feedback Score: 2 reviews	How much is the RUCAs for the S13 shipped to 95123? Thanks __________________ Instagram

08-10-2008, 11:15 PM	#2010
240love Post Whore! Join Date: Dec 2006 Location: Oxnard Posts: 2,855 Trader Rating: (13) Feedback Score: 13 reviews	Hey dan i pmed you about some parts but i forgot to mention these were for an s13.. LMK Plz!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode