boosting a friend's KA

[BoostedBoogie]

sorry i only have some old pics of my car found here http://www.geocities.com/driftingboogie/april52003.htm ..some small details about my setup.. i have an ATX transmission, yes that's right. its been rebuild and shotpeened by level10 and i have an upgraded torque converter from them too. i wanted that sequential shift kit thing, but that was just too much. im on stock injectors, 2nd gen rx7 fuel pump and maf, a rising rate fpr from vortech 12:1 *running kind of rich for me so i might swap out for a 8 or 10, everything internal stock except for some steel forged rods and pistons from JE and a new headgasket, mazdaspeed motor mounts, 1.6L sohc *yes my car is SOHC too* underdrive pulley, gude custom camshaft, stock cam gear, b&m transmission cooler, ported throttlebody, angled butterfly *weird mod my friend did, but worked nicely at the time*, ported intake/exhaust valve ports, 3 angle valve job, ported header ports, custom manifold mated to a rather medium-sized T3 turbo, a spearco FMIC with the coldside endtank relocated to the top, 2.25" coldside piping, 2" hotside piping, hks SS bov, 2.5" downpipe ran to muffler in engine bay and dumptube out of the side of front bumper *and no it doesn't sound like **** it sounds perfect.. reason for this is weight reduction for exhaust rear piping and so there was more weight up front*.. oh and btw, did i mention my car's curb weight was around 2500 stock, but is now 2377? pretty good eh?

a rather simple turbo setup and very similar to what my friend wants.. mostly because this setup was very reliable and cheap.