blown turbo - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

typhoondriven · 11-30-2008, 04:30 PM

whats up every one i am new to this site. my name is kyle and i have an 89 two tone coupe with a red top sr. so i just bought a new garret gt2871r .64ar and it is now blown. i drove my car for four days. less the 100 miles. people are telling my i needed to put on a oil resrictor. so i have done alot of research and people say yes and no. even though i didnt put one on is this the reason my turbo blew. thanks kyle

krisdeezy · 11-30-2008, 04:38 PM

yes it could be the reason your oil seal went bad.

typhoondriven · 11-30-2008, 05:25 PM

also what size restrictor do i need i have circut sport lines

typhoondriven · 12-01-2008, 01:06 PM

okay so i took off the turbo last night and i pulled off the lines and there is a restrictor on it. is the turbo maybe getting to hot. i mean is there anything it could be?

Sileighty_85 · 12-02-2008, 07:51 AM

Just to clarify there is NOT a restictor Built into the turbo.
the turbo feed line port is a flared fitting for the oil line its not a restrictor.
The restrictor is normally (stock) the bajo bolt for the stock lines, Do not use T25 banjo bolt, but an A/M restrictor is normally on the block then connects to the feed line.

Circuit sport lines are fine im using them for mine, as far as the resrictor size (cant remember) Its been covered multiple times so Search.

slider2828 · 12-02-2008, 09:21 AM

Typhoon. Just get the GT Restrictor from ATPturbo.com... I have ran like 6 months without a restrictor and no big problems, but since then I have used one I think that is definitely the way to go. Good luck...

Grimsta · 12-02-2008, 11:13 AM

Where are you located? Do you need your turbo rebuilt? We provide those services for Garrett turbos

*fliprayzin240sx* · 12-02-2008, 01:38 PM

Umm...even without a damn restrictor, it shouldnt fucking blow in less than 100 miles because of it. I've run my first GT2871 on stock T25 lines for over 2 yrs before Ive had some ill-effect from it. And thats with me running 18 psi all day everyday and logged in atleast 40k miles.

If its blown, sucks, cuz theyre not rebuildable, your pretty much gonna be buying a new turbo. Buy a new CHRA and swap over the housings and hardware from your old turbo. Will cost you atleast $650 for a new CHRA from Garrett.

slider2828 · 12-02-2008, 01:49 PM

yah I was under the impression it wasn't rebuildable.... pretty much new CHRA plug and play....

typhoondriven · 12-02-2008, 07:56 PM

yes i did use the stock t25 banjo bolt. i didnt know that was a restrictor. thanks for your help and i hope this is the problem. plus i have a restrictor on the line. so all in all i starved my turbo of oil.

s13.5guy · 12-02-2008, 08:07 PM

Kyle you're on here?

Wow.

Lol.

Same username too...lol.

Did you try calling me yesterday?

I got a new phone so if it was you, ill save the number

Grimsta · 12-05-2008, 10:34 AM

$650, LMAO.. more like $875 and THAT'S from Garrett

11-30-2008, 04:30 PM	#1
typhoondriven Join Date: Oct 2008 Location: everett Age: 37 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	blown turbo whats up every one i am new to this site. my name is kyle and i have an 89 two tone coupe with a red top sr. so i just bought a new garret gt2871r .64ar and it is now blown. i drove my car for four days. less the 100 miles. people are telling my i needed to put on a oil resrictor. so i have done alot of research and people say yes and no. even though i didnt put one on is this the reason my turbo blew. thanks kyle

12-02-2008, 07:51 AM	#5
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Just to clarify there is NOT a restictor Built into the turbo. the turbo feed line port is a flared fitting for the oil line its not a restrictor. The restrictor is normally (stock) the bajo bolt for the stock lines, Do not use T25 banjo bolt, but an A/M restrictor is normally on the block then connects to the feed line. Circuit sport lines are fine im using them for mine, as far as the resrictor size (cant remember) Its been covered multiple times so Search. __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

12-02-2008, 09:21 AM	#6
slider2828 Post Whore! Join Date: Oct 2004 Location: San Francisco, CA Posts: 6,040 Trader Rating: (13) Feedback Score: 13 reviews	Typhoon. Just get the GT Restrictor from ATPturbo.com... I have ran like 6 months without a restrictor and no big problems, but since then I have used one I think that is definitely the way to go. Good luck... __________________ Turn and Burn!

12-02-2008, 01:38 PM	#8
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Umm...even without a damn restrictor, it shouldnt fucking blow in less than 100 miles because of it. I've run my first GT2871 on stock T25 lines for over 2 yrs before Ive had some ill-effect from it. And thats with me running 18 psi all day everyday and logged in atleast 40k miles. If its blown, sucks, cuz theyre not rebuildable, your pretty much gonna be buying a new turbo. Buy a new CHRA and swap over the housings and hardware from your old turbo. Will cost you atleast $650 for a new CHRA from Garrett. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

12-02-2008, 01:49 PM	#9
slider2828 Post Whore! Join Date: Oct 2004 Location: San Francisco, CA Posts: 6,040 Trader Rating: (13) Feedback Score: 13 reviews	yah I was under the impression it wasn't rebuildable.... pretty much new CHRA plug and play.... __________________ Turn and Burn!

11-30-2008, 04:38 PM	#2
krisdeezy Zilvia Addict Join Date: Feb 2008 Location: three two three / The Rockk Age: 31 Posts: 913 Trader Rating: (17) Feedback Score: 17 reviews	yes it could be the reason your oil seal went bad.

11-30-2008, 05:25 PM	#3
typhoondriven Join Date: Oct 2008 Location: everett Age: 37 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	also what size restrictor do i need i have circut sport lines

12-01-2008, 01:06 PM	#4
typhoondriven Join Date: Oct 2008 Location: everett Age: 37 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	okay so i took off the turbo last night and i pulled off the lines and there is a restrictor on it. is the turbo maybe getting to hot. i mean is there anything it could be?

12-02-2008, 11:13 AM	#7
Grimsta Leaky Injector Join Date: Jan 2008 Location: ca. Age: 41 Posts: 73 Trader Rating: (0) Feedback Score: 0 reviews	Where are you located? Do you need your turbo rebuilt? We provide those services for Garrett turbos

12-02-2008, 07:56 PM	#10
typhoondriven Join Date: Oct 2008 Location: everett Age: 37 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	yes i did use the stock t25 banjo bolt. i didnt know that was a restrictor. thanks for your help and i hope this is the problem. plus i have a restrictor on the line. so all in all i starved my turbo of oil.

12-02-2008, 08:07 PM	#11
s13.5guy Leaky Injector Join Date: Sep 2007 Location: Washington Age: 38 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	Kyle you're on here? Wow. Lol. Same username too...lol. Did you try calling me yesterday? I got a new phone so if it was you, ill save the number __________________

12-05-2008, 10:34 AM	#12
Grimsta Leaky Injector Join Date: Jan 2008 Location: ca. Age: 41 Posts: 73 Trader Rating: (0) Feedback Score: 0 reviews	$650, LMAO.. more like $875 and THAT'S from Garrett

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode