Injector power wire, where is it?? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

invain · 01-01-2009, 06:57 PM

Yeah just ran through the guide in the fsm and checked all the connections. No dice.

At this point I have no clue wtf is going on unless the cas is bad.

Can a malfunctioning cam position sensor cause only one cylinder to misfire? We checked all connections to the cas according to the fsm. We checked all connections to the injector. Fixed a small short in the power wire to injector 2 so it now shows the correct 12 volts. We've used two different ecu's with no change in cylinder 2.

projectRDM · 01-01-2009, 07:07 PM

Stupid question, but did you swap the injector? Try swapping plugs from another injector that you know is good, plug it in to the questionable one.

01-01-2009, 07:07 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Stupid question, but did you swap the injector? Try swapping plugs from another injector that you know is good, plug it in to the questionable one. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-01-2009, 06:57 PM	#1
invain Join Date: Jul 2008 Location: Michigan Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	Yeah just ran through the guide in the fsm and checked all the connections. No dice. At this point I have no clue wtf is going on unless the cas is bad. Can a malfunctioning cam position sensor cause only one cylinder to misfire? We checked all connections to the cas according to the fsm. We checked all connections to the injector. Fixed a small short in the power wire to injector 2 so it now shows the correct 12 volts. We've used two different ecu's with no change in cylinder 2.