any ca owners out there - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

slow2404now · 01-23-2009, 01:18 PM

does anyone know if a top mount and a external wastegate will work with the stock ca turbo and has any one used any of cxracings products

ZX88 · 01-23-2009, 01:21 PM

i have a cx racing fmic but for a sr shouldn't matter regardless. but the welds,piping and core where all nice, fit nice, but one of the couplings i receive with the kit was to big. so i had to buy a new one.

gaz_moose · 01-23-2009, 01:37 PM

you want to fit an external wastegate to a T25?
the stock manifold is good for about 350hp if it were me id spend the money on a t25g off a red top SR or a T28 off a blacktop SR you just have to rotate the core and elongate one of the turbo elbow holes use the T28 gasket as a template.
ive never seen that front mount kit but from what ive seen of others the coldside of the pipework is usually quite far out fitment wise for the ca

s13_ono · 01-23-2009, 01:38 PM

are you trying to run the fwd ca intake manifold too? The one that goes over the top like te rb ones? If you end up running a top mount and that manifold, let me know how it goes. I'm putting together a ca and theres one of those manifolds at the junk yard. Good luck with that!

slow2404now · 01-23-2009, 01:54 PM

im trying to use cxracings topmount and 38mm wastegate it has a t3/t4 flange i didnt know if you could use the 25 with that topmount im just trying to get every thing else done before the motor goes in really dont have the extra money to upgrade the turbo yet

slow2404now · 01-23-2009, 01:59 PM

im goin to use cx racings top mount manifold and there 38mm external gate

s13_ono · 01-23-2009, 02:01 PM

does the i.c. come with piping or are you gonna go custom/universal stuff?

s13_ono · 01-23-2009, 02:02 PM

oh wait. youre talking about the top mount manifold not intercooler right?

SR240DET · 01-23-2009, 05:30 PM

I think your one of the last few left. Time to get on your pioneering pants, and get innovative.

racepar1 · 01-23-2009, 05:40 PM

Why the fucking hell would you want a top mount mani and an external wastegate with a stock turbo? Shit is dumb.

Slammed180 · 01-23-2009, 06:33 PM

Quote:

Originally Posted by racepar1

Why the fucking hell would you want a top mount mani and an external wastegate with a stock turbo? Shit is dumb.

thank you......

Sleepy240 · 01-23-2009, 06:45 PM

is it just me or have there been some REALLY dumb questions asked in here lately??? My head hurts =(

01-23-2009, 01:18 PM	#1
slow2404now Join Date: Jan 2009 Location: virginia beach Age: 44 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	any ca owners out there does anyone know if a top mount and a external wastegate will work with the stock ca turbo and has any one used any of cxracings products

01-23-2009, 01:38 PM	#4
s13_ono Leaky Injector Join Date: Sep 2007 Location: Fountain Valley,CA Age: 36 Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	are you trying to run the fwd ca intake manifold too? The one that goes over the top like te rb ones? If you end up running a top mount and that manifold, let me know how it goes. I'm putting together a ca and theres one of those manifolds at the junk yard. Good luck with that! __________________ [SIGPIC]

01-23-2009, 01:54 PM	#5
slow2404now Join Date: Jan 2009 Location: virginia beach Age: 44 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	cxracing top mount im trying to use cxracings topmount and 38mm wastegate it has a t3/t4 flange i didnt know if you could use the 25 with that topmount im just trying to get every thing else done before the motor goes in really dont have the extra money to upgrade the turbo yet

01-23-2009, 02:01 PM	#7
s13_ono Leaky Injector Join Date: Sep 2007 Location: Fountain Valley,CA Age: 36 Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	does the i.c. come with piping or are you gonna go custom/universal stuff? __________________ [SIGPIC]

01-23-2009, 02:02 PM	#8
s13_ono Leaky Injector Join Date: Sep 2007 Location: Fountain Valley,CA Age: 36 Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	oh wait. youre talking about the top mount manifold not intercooler right? __________________ [SIGPIC]

01-23-2009, 01:21 PM	#2
ZX88 Post Whore! Join Date: Oct 2005 Location: ATX Age: 36 Posts: 2,946 Trader Rating: (8) Feedback Score: 8 reviews	i have a cx racing fmic but for a sr shouldn't matter regardless. but the welds,piping and core where all nice, fit nice, but one of the couplings i receive with the kit was to big. so i had to buy a new one.

01-23-2009, 01:37 PM	#3
gaz_moose Zilvia Member Join Date: Mar 2008 Location: engerland Posts: 242 Trader Rating: (0) Feedback Score: 0 reviews	you want to fit an external wastegate to a T25? the stock manifold is good for about 350hp if it were me id spend the money on a t25g off a red top SR or a T28 off a blacktop SR you just have to rotate the core and elongate one of the turbo elbow holes use the T28 gasket as a template. ive never seen that front mount kit but from what ive seen of others the coldside of the pipework is usually quite far out fitment wise for the ca

01-23-2009, 01:59 PM	#6
slow2404now Join Date: Jan 2009 Location: virginia beach Age: 44 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	im goin to use cx racings top mount manifold and there 38mm external gate

01-23-2009, 05:30 PM	#9
SR240DET Zilvia FREAK! Join Date: Mar 2002 Location: orida Posts: 1,490 Trader Rating: (0) Feedback Score: 0 reviews	I think your one of the last few left. Time to get on your pioneering pants, and get innovative.

01-23-2009, 05:40 PM	#10
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	Why the fucking hell would you want a top mount mani and an external wastegate with a stock turbo? Shit is dumb.

01-23-2009, 06:45 PM	#12
Sleepy240 Zilvia Addict Join Date: Sep 2005 Location: Reading, PA Age: 39 Posts: 780 Trader Rating: (0) Feedback Score: 0 reviews	is it just me or have there been some REALLY dumb questions asked in here lately??? My head hurts =(

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode