overheated...

[Slacker_221]

Originally Posted by ¹²³Klan™

what does your oil look like?

The oil is little milky with the water, and i can see some condensation in the valve cover.

Is it worth it to try and put a new head gasket in andsee if that works or does the motor sound fried?

Also if it is the head, will a sr20de(not det) head fit on a ka24de? if it does i know it will give alot more compression...

[sillydrift]

Originally Posted by Slacker_221

The oil is little milky with the water, and i can see some condensation in the valve cover.

Is it worth it to try and put a new head gasket in andsee if that works or does the motor sound fried?

The water is getting in your oil due to your headgasket not sealing properly. Like the others said you can replace the head gasket but make sure the block or the head is not warped, or else you are still going to have issues with the head gasket sealing properly

[wow-thats-a-cool-car]

Originally Posted by Slacker_221

The oil is little milky with the water, and i can see some condensation in the valve cover.

Is it worth it to try and put a new head gasket in andsee if that works or does the motor sound fried?

Also if it is the head, will a sr20de(not det) head fit on a ka24de? if it does i know it will give alot more compression...

noob statement thread lol

but no only a KA24DE head works on a KA24DE. But nice try lol

[Slacker_221]

Originally Posted by wow-thats-a-cool-car

noob statement thread lol

but no only a KA24DE head works on a KA24DE. But nice try lol

Yeah noob with these nissan motors, I've been a Honda guy and the heads on Hondas are interchangable...

[bigboto_boy]

Originally Posted by Slacker_221

Yeah noob with these nissan motors, I've been a Honda guy and the heads on Hondas are interchangable...

amen to that haha i am a honda guy myself and basically honda parts can fit on any honda part lol

all heads are interchangeable in hondas but b's have to go into b's and d's have to go into d series block same shit with the k series

i know honda inside in out and im still learning about nissan


back on topic just get a whole new motor !!!

[joeapple8]

Originally Posted by bigboto_boy

amen to that haha i am a honda guy myself and basically honda parts can fit on any honda part lol

all heads are interchangeable in hondas but b's have to go into b's and d's have to go into d series block same shit with the k series

i know honda inside in out and im still learning about nissan


back on topic just get a whole new motor !!!

same here, haha still tryna figure out my nissan here as well, as for your blown head gasket, most likely your head is warped/cracked, Id just buy a new engine if I had the money..