sr20det runing problems with codes... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

opponheimer · 03-26-2009, 05:46 PM

You either have a fucked up harness or don't have things plugged in or fucked your own harness up. When you're doing a wiring job you only have to extend the mafs, don't have to touch the CAS wiring, ETC wiring etc... so these are what you need to do:

1. Check ECU plug for being warped
2. Open ECU check if plug leads have snapped.
3. Unplug and Replug all connections. You might also have a key grounds missing.
4. Test somone elses ECU or have your vendor replace it free of charge.
5. Have harness examined (by me

(me "soliciting"))

11 Crank Angle Sensor
12 Mass Air Flow Sensor
13 ECT Sensor
21 Ignition Signal Circuit

03-26-2009, 05:46 PM	#3
opponheimer Zilvia FREAK! Join Date: Apr 2007 Location: Bikini Atoll Posts: 1,267 Trader Rating: (3) Feedback Score: 3 reviews	You either have a fucked up harness or don't have things plugged in or fucked your own harness up. When you're doing a wiring job you only have to extend the mafs, don't have to touch the CAS wiring, ETC wiring etc... so these are what you need to do: 1. Check ECU plug for being warped 2. Open ECU check if plug leads have snapped. 3. Unplug and Replug all connections. You might also have a key grounds missing. 4. Test somone elses ECU or have your vendor replace it free of charge. 5. Have harness examined (by me (me "soliciting")) 11 Crank Angle Sensor 12 Mass Air Flow Sensor 13 ECT Sensor 21 Ignition Signal Circuit __________________ SR20 & RB20/25/26 in s13/s14 Wiring from $125 to $200.. Best prices EVER.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode