![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Chat General Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
![]() |
#36 |
Leaky Injector
|
No pics ATM, but I will update
1) s13 2) megan street, RUCA, SPL tie rod ends, PDM spherical endlinks... 3) front: s14 se alloys 16/6.5 +40 with yokohama advan sports 205/45 REAR: z32 N/A alloys 16/7 +45 I think, with yokohama AVS ES100 245/45 (yes, they are too wide) NOTE: z32 wheels DO NOT CLEAR my front suspension. the rim/tire touches the spring perch of the coilover IN THE FRONT. I am pretty sure that this would happen even if the tires were streched (like 195s). I would need spacers for the front. I say this because it may prevent someone making my mistake (trying to put z32 wheels on an s13 with z32 brakes). 4) given 5) +40 and +45 I believe 6) none 7) yokohama both 8)-.5 FRONT and -1.5 rear (did not adjust the front yet). NOTE if I ran more agressive camber in the front, it would make it even more difficult to fit the z32 wheels on the front, as the tilted wheel would impact the coilover to an even greater degree. 9) the current set up DOES clear z- brakes and coilovers. note that z32 wheel FRONT will not clear COILOVERS on an s13. 10) none 11) none at the moment 12) none 13) not sure, but between 35 and 40. 14) not sure |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|