aluminum flywheel..good or bad? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Bill Roberts · 07-08-2003, 08:07 PM

Old, I don't like bending things....

Block is removable, weaking the throttle pedal strut is not..

I see your point...but not for me, don't want to stress a cable at full throttle.

I already removed the block (behind the pedal) so I know about snapping cables and have calibrated it for the top block. Some thought and experience actually went into this...somewhat..

It's all about what you get used to (flywheels, pedal extenders, cable management, my technique in heel toe) and what you are willing to get used to.

07-08-2003, 08:07 PM	#1
Bill Roberts Zilvia FREAK! Join Date: May 2003 Location: S FL. Posts: 1,538 Trader Rating: (0) Feedback Score: 0 reviews	Old, I don't like bending things.... Block is removable, weaking the throttle pedal strut is not.. I see your point...but not for me, don't want to stress a cable at full throttle. I already removed the block (behind the pedal) so I know about snapping cables and have calibrated it for the top block. Some thought and experience actually went into this...somewhat.. It's all about what you get used to (flywheels, pedal extenders, cable management, my technique in heel toe) and what you are willing to get used to. Last edited by Bill Roberts; 07-08-2003 at 08:16 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode