KA/SR swap Tranny sensor questions - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

srJOEYdet · 08-26-2003, 09:30 AM

I found out that the clutch in sensor is on the pedal itself.

this is a quote from another forum...KA tranny plugs: speed sensor, neutral position, 4th gear, 5th gear, reverse.

4th and 5th gear sensors are for the speed limiter, it kicks in the speed limiter at around 5000 rpms in 4th and 5th gear. You dont really need theses.

SR: speed, reverse, neutral (or 5th?)

As for when you switch the plugs, the plugs corespond to each switch, so you cant mix them up by accident.

Clutch/Start switch is on the pedal, right above the cruise control switch.

*posted by Nismo1182

Also, I could tell because there was no vacuum box with a secondary throttle cable leading to my throttle body on the SR engine. (CC)

Joey

08-26-2003, 09:30 AM	#3
srJOEYdet Zilvia Member Join Date: May 2002 Location: Portland, Oregon Age: 39 Posts: 260 Trader Rating: (0) Feedback Score: 0 reviews	I found out that the clutch in sensor is on the pedal itself. this is a quote from another forum...KA tranny plugs: speed sensor, neutral position, 4th gear, 5th gear, reverse. 4th and 5th gear sensors are for the speed limiter, it kicks in the speed limiter at around 5000 rpms in 4th and 5th gear. You dont really need theses. SR: speed, reverse, neutral (or 5th?) As for when you switch the plugs, the plugs corespond to each switch, so you cant mix them up by accident. Clutch/Start switch is on the pedal, right above the cruise control switch. *posted by Nismo1182 Also, I could tell because there was no vacuum box with a secondary throttle cable leading to my throttle body on the SR engine. (CC) Joey __________________ Exceed 400x200 size limit

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode