My 1992 S13 Drift Car Build up - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Volchok · 01-04-2010, 02:47 AM

^^^ yeah that goes to heater core, one of the spots you can block off but the head and block have to be looped. This is the best way, AN fittings and a short loop, it will also be cushion clamped to the motor. You don't wan t to be in the middle of an event and tear a heat hose line, and the stock piece for this has about 5 sections any one of which could leak.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-04-2010, 02:47 AM	#1
Volchok Zilvia Junkie Join Date: Sep 2007 Location: las vegas Age: 49 Posts: 374 Trader Rating: (16) Feedback Score: 16 reviews	^^^ yeah that goes to heater core, one of the spots you can block off but the head and block have to be looped. This is the best way, AN fittings and a short loop, it will also be cushion clamped to the motor. You don't wan t to be in the middle of an event and tear a heat hose line, and the stock piece for this has about 5 sections any one of which could leak.