Pulling an sr20 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

90hatchie · 01-31-2010, 06:15 PM

yea to take it out pull the shift boots off and you will need a C clip remover (can be bought at sears) or u can use some needle nose pliers
after the clip is out pull shifter up and out then stuff a CLEAN rag into the hole
and PULLLLLLLLLLL motor out
i did pulled my ka24de out out of boredem cuz it has knock was my first time pulling and i just disconnected everything double checked all hoses and what not and it came up and out

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-31-2010, 06:15 PM	#1
90hatchie Banned from the Marketplace Join Date: Dec 2006 Location: yorktown hts ny Age: 36 Posts: 2,984 Trader Rating: (15) Feedback Score: 15 reviews	yea to take it out pull the shift boots off and you will need a C clip remover (can be bought at sears) or u can use some needle nose pliers after the clip is out pull shifter up and out then stuff a CLEAN rag into the hole and PULLLLLLLLLLL motor out i did pulled my ka24de out out of boredem cuz it has knock was my first time pulling and i just disconnected everything double checked all hoses and what not and it came up and out