engine problem.... need help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

andrave · 10-12-2003, 01:11 PM

do the flywheel while you have the tranny off. Go ahead and change the slave cylinder (if its the original it will probably blow soon anyway) and bleed the clutch system.

the shifter can wait till later because you don't have to drop the tranny for that. but dropping the tranny is a bitch so get all your eggs in one basket while you are doing that.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-12-2003, 01:11 PM	#1
andrave BANNED Join Date: Apr 2002 Location: Burton WV Posts: 2,350 Trader Rating: (0) Feedback Score: 0 reviews	do the flywheel while you have the tranny off. Go ahead and change the slave cylinder (if its the original it will probably blow soon anyway) and bleed the clutch system. the shifter can wait till later because you don't have to drop the tranny for that. but dropping the tranny is a bitch so get all your eggs in one basket while you are doing that.