need some help/info on z32 brakes - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mista808 · 02-10-2010, 08:30 PM

could really find a definite answer anywhere so....

i got a 95 Q45, stock brakes front and rear. i also have 19x9.5 up front and 19x10.5 in the rear. between the stock front caliper and face of the rim i have between 1/2"-3/4" clearance.. and the rear, about or over 1"... would i be able to fit stock z32 brakes? i think the rears will be fine, but unsure about the front. my rear wheels sit pretty flush, my fronts could be more flush but i wanted to dial in the front camber/less negative to flush it so i dont want to run spacers... any info is greatly appreciated...

projectRDM · 02-10-2010, 09:26 PM

You need to specify wheel type and offset. A loose measurement doesn't do anybody any good.

Xise · 03-01-2010, 10:32 PM

r33 calipers actually use the same diameter rotor as the 01 Q45 if that helps...with 19" rims I imagine you will have plenty of clearance

just a bit of info:

01-97 Q45 front rotor 28mm x 296mm
z32 front rotor 26mm or 30mm x 280
r33 front rotor 30mm x 296mm

just gives you some options to choose from, the rears on z32/r32/r33 are the same...keep in mind the working ebrake assembly is very expensive..... these rotors/calipers fit under 16" rims and some 15" so with 19s you should be more than straight.

good luck choosing brakes!! fun yet expensive!!

02-10-2010, 08:30 PM	#1
mista808 Join Date: Jan 2004 Location: hawaii Age: 41 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	need some help/info on z32 brakes could really find a definite answer anywhere so.... i got a 95 Q45, stock brakes front and rear. i also have 19x9.5 up front and 19x10.5 in the rear. between the stock front caliper and face of the rim i have between 1/2"-3/4" clearance.. and the rear, about or over 1"... would i be able to fit stock z32 brakes? i think the rears will be fine, but unsure about the front. my rear wheels sit pretty flush, my fronts could be more flush but i wanted to dial in the front camber/less negative to flush it so i dont want to run spacers... any info is greatly appreciated...

02-10-2010, 09:26 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	You need to specify wheel type and offset. A loose measurement doesn't do anybody any good. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-01-2010, 10:32 PM	#3
Xise Zilvia Member Join Date: Mar 2009 Location: New England Age: 41 Posts: 179 Trader Rating: (2) Feedback Score: 2 reviews	r33 calipers actually use the same diameter rotor as the 01 Q45 if that helps...with 19" rims I imagine you will have plenty of clearance just a bit of info: 01-97 Q45 front rotor 28mm x 296mm z32 front rotor 26mm or 30mm x 280 r33 front rotor 30mm x 296mm just gives you some options to choose from, the rears on z32/r32/r33 are the same...keep in mind the working ebrake assembly is very expensive..... these rotors/calipers fit under 16" rims and some 15" so with 19s you should be more than straight. good luck choosing brakes!! fun yet expensive!!