Bolts to put engine on stand? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Kougeki · 03-17-2010, 03:45 PM

I have a KA24DE, and I use to have the bolts to hold the engine up, but now
I lost them. I just need 4, obviously. I got some, but they are too big and don't even thread in. Any help would be greatly appreciated.
I got 10X1.50 and some 10X1.75.

Thanks.

dongoesby · 03-17-2010, 03:49 PM

got to hardware stores like ACE, do some matchings. It is really self-explanatory.

that is how i did mine when i lost some of those bolts

remember to get grade 8 or above!

UNISA JECS · 03-17-2010, 03:51 PM

Just take the stock bolts to napa have them matched up and buy them in the lenght you need and get the strongest ones you can for good measure, thats what I did.

Kougeki · 03-17-2010, 03:58 PM

Thing is that I have a KA in my car already. I don't have the stock bolts. I would have to remove them, and right now... this heat in SoCal isn't helping.
Thanks guys

iROYAL · 03-17-2010, 04:04 PM

What about removing one of the starter bolts and use that as reference.

dato · 03-17-2010, 04:09 PM

The threwad pitch is 1.5 and u need 2 to be about 110mm long depending on engine stand and another 2 of 70mm long I'm sure this will work for u

Kougeki · 03-17-2010, 04:59 PM

Ok, the pitch is 1.50 then. The bolts i got are too thick. I'll try the starter bolt.

s13mike91 · 04-01-2010, 12:13 PM

i've always used some old ka head bolts.

03-17-2010, 03:45 PM	#1
Kougeki Zilvia Junkie Join Date: Sep 2007 Location: Santa Ana, CA Age: 38 Posts: 593 Trader Rating: (3) Feedback Score: 3 reviews	Bolts to put engine on stand? I have a KA24DE, and I use to have the bolts to hold the engine up, but now I lost them. I just need 4, obviously. I got some, but they are too big and don't even thread in. Any help would be greatly appreciated. I got 10X1.50 and some 10X1.75. Thanks. __________________ *Gamertag:XxChumbawumbaxX*

03-17-2010, 03:51 PM	#3
UNISA JECS Nissanaholic! Join Date: Feb 2007 Location: Socal Fontana Age: 46 Posts: 2,380 Trader Rating: (40) Feedback Score: 40 reviews	Just take the stock bolts to napa have them matched up and buy them in the lenght you need and get the strongest ones you can for good measure, thats what I did. __________________ PARTS 4 SALE !! Z32 E-Brake/Parking Brake Heatshield Assemblys!!! *Rep/Feedbacks*

03-17-2010, 03:58 PM	#4
Kougeki Zilvia Junkie Join Date: Sep 2007 Location: Santa Ana, CA Age: 38 Posts: 593 Trader Rating: (3) Feedback Score: 3 reviews	Thing is that I have a KA in my car already. I don't have the stock bolts. I would have to remove them, and right now... this heat in SoCal isn't helping. Thanks guys __________________ *Gamertag:XxChumbawumbaxX*

03-17-2010, 04:59 PM	#7
Kougeki Zilvia Junkie Join Date: Sep 2007 Location: Santa Ana, CA Age: 38 Posts: 593 Trader Rating: (3) Feedback Score: 3 reviews	Ok, the pitch is 1.50 then. The bolts i got are too thick. I'll try the starter bolt. __________________ *Gamertag:XxChumbawumbaxX*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-17-2010, 03:49 PM	#2
dongoesby Zilvia Addict Join Date: Mar 2007 Location: San Francisco Age: 38 Posts: 756 Trader Rating: (17) Feedback Score: 17 reviews	got to hardware stores like ACE, do some matchings. It is really self-explanatory. that is how i did mine when i lost some of those bolts remember to get grade 8 or above!

03-17-2010, 04:04 PM	#5
iROYAL Zilvia Addict Join Date: Jan 2007 Location: 310 Posts: 763 Trader Rating: (4) Feedback Score: 4 reviews	What about removing one of the starter bolts and use that as reference.

03-17-2010, 04:09 PM	#6
dato Zilvia Junkie Join Date: Jun 2009 Location: california Age: 38 Posts: 434 Trader Rating: (6) Feedback Score: 6 reviews	The threwad pitch is 1.5 and u need 2 to be about 110mm long depending on engine stand and another 2 of 70mm long I'm sure this will work for u

04-01-2010, 12:13 PM	#8
s13mike91 Leaky Injector Join Date: Aug 2009 Location: Montgomery, AL Age: 33 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	i've always used some old ka head bolts.