need help removing lower timing cover plzzzzz... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

silviastyle · 11-16-2003, 02:23 PM

alright here it goes, I somehow got a small hole in my lower timing cover?? WTF!! anyways, I am trying to remove it to replace it, its loose but wont come off?? am i missing anything. All the bolts are off, the upper cover is off, water pump off... nothing in the way on the outside of the cover... front bolts on oil pan are off... I can move the cover about an inch but cant get the SOB off...
Any help plz...

oberkill · 11-16-2003, 10:51 PM

Really need to know what engine you have in your car to help you!

Alan

airsoft · 11-17-2003, 01:30 PM

you have to drop the front of the oil pan, and remove 2 strainer bolts. then it will come off. i did my timing chain kit on a ka24de.

silviastyle · 11-18-2003, 12:33 PM

sorry about not telling what engine it was. ka24de 96' s14.. thanx for the reply on the oil pan, I ended up pulling out my front strut bar to get it off completely. I needed to put the energy suspension kit, and the new tension rods on anyways.

airsoft · 11-18-2003, 12:53 PM

hope it helped good luck !

11-16-2003, 02:23 PM	#1
silviastyle Join Date: Mar 2002 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	need help removing lower timing cover plzzzzz... alright here it goes, I somehow got a small hole in my lower timing cover?? WTF!! anyways, I am trying to remove it to replace it, its loose but wont come off?? am i missing anything. All the bolts are off, the upper cover is off, water pump off... nothing in the way on the outside of the cover... front bolts on oil pan are off... I can move the cover about an inch but cant get the SOB off... Any help plz...

11-16-2003, 10:51 PM	#2
oberkill Zilvia Junkie Join Date: Oct 2001 Location: St. Louis, MO Posts: 314 Trader Rating: (0) Rides Gallery: oberkill Feedback Score: 0 reviews	Really need to know what engine you have in your car to help you! Alan __________________ http://www.project240.com

11-17-2003, 01:30 PM	#3
airsoft Zilvia FREAK! Join Date: Jul 2003 Location: So Cal Posts: 1,231 Trader Rating: (0) Feedback Score: 0 reviews	did you do this ? you have to drop the front of the oil pan, and remove 2 strainer bolts. then it will come off. i did my timing chain kit on a ka24de.

11-18-2003, 12:53 PM	#5
airsoft Zilvia FREAK! Join Date: Jul 2003 Location: So Cal Posts: 1,231 Trader Rating: (0) Feedback Score: 0 reviews	good luck hope it helped good luck !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-18-2003, 12:33 PM	#4
silviastyle Join Date: Mar 2002 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	sorry about not telling what engine it was. ka24de 96' s14.. thanx for the reply on the oil pan, I ended up pulling out my front strut bar to get it off completely. I needed to put the energy suspension kit, and the new tension rods on anyways.