KA24DE ignition timing - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Dream240 · 07-19-2010, 10:15 PM

Thanks for the feedback guys.

I'm going to swap the stock pulley back on and check the timing that way and see if my timing is really at 29 BTDC.

It's wierd because I marked the Dist. via the top mounting bolt position the very first time I serviced the timing. And I put the dist. right back to that point.

The same shop smogged me 2 years ago and the timing was at 20 deg.

hmmm.....I'm sure the stock pulley will solve my problems.

Thanks again.

07-19-2010, 10:15 PM	#10
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	Thanks for the feedback guys. I'm going to swap the stock pulley back on and check the timing that way and see if my timing is really at 29 BTDC. It's wierd because I marked the Dist. via the top mounting bolt position the very first time I serviced the timing. And I put the dist. right back to that point. The same shop smogged me 2 years ago and the timing was at 20 deg. hmmm.....I'm sure the stock pulley will solve my problems. Thanks again. __________________ Don't mess with my monkey...he's loaded.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode