Z32 Brake help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Jordan249 · 10-27-2010, 03:37 PM

I need to replace my bleeder screws on my Z32 aluminum calipers from a auto 1990 300ZX 2+2. I put them on my S14, but aren't bleeding right. I know that they are 10mmx1 but I have found three different sized for length from different sources. Does it matter on the length? Where the hell can I get speed bleeders for this? O'rieleys seem to be the only place that carries a metric size. btw, I've seen 27mm, 33mm, and 35mm.
Thanks in advance

homeslicej2 · 10-27-2010, 04:21 PM

Try checking with a local dealership to see what they come up with for the brakes on that particular model. When I checked Courtesyparts.com they only had one part number for the entire model range. You can check with SPLparts or Z1 motorsports as to the proper size/length as well.

Sileighty_85 · 10-27-2010, 05:11 PM

go to dealership and order this

Its the bleeder
41128-A0100-

joshchewuhh · 10-27-2010, 05:22 PM

also if they arnt bleeding right make sure the bleeder is on the top instead of the bottom.

nathanong87 · 10-27-2010, 05:28 PM

Quote:

Originally Posted by joshchewuhh

also if they arnt bleeding right make sure the bleeder is on the top instead of the bottom.

this.......

Jordan249 · 10-28-2010, 09:36 AM

Quote:

Originally Posted by Sileighty_85

go to dealership and order this

Its the bleeder
41128-A0100-

Quote:

Originally Posted by joshchewuhh

also if they arnt bleeding right make sure the bleeder is on the top instead of the bottom.

Bleeder is on top, I know that for sure. I also already got the part number, but the nissan dealership didn't have the specifications. I would like speed bleeders however.

Bumnah · 10-28-2010, 10:22 AM

- SPL PARTS

Jordan249 · 10-28-2010, 10:36 AM

Quote:

Originally Posted by Bumnah

- SPL PARTS

Well... I need z32 ones, and have already ordered some, but i guess ill just measure them when they get ehre.

homeslicej2 · 10-28-2010, 12:01 PM

^the ones they sell are universal for Nissan (and probably others) IIRC. When I got mine they fit my stock S13 calipers I had pulled off, the J30's that I had installed, and the Q45's I had sitting around.

10-27-2010, 03:37 PM	#1
Jordan249 Zilvia Junkie Join Date: Jan 2009 Location: Albuquerque, NM Age: 35 Posts: 444 Trader Rating: (3) Feedback Score: 3 reviews	Z32 Brake help I need to replace my bleeder screws on my Z32 aluminum calipers from a auto 1990 300ZX 2+2. I put them on my S14, but aren't bleeding right. I know that they are 10mmx1 but I have found three different sized for length from different sources. Does it matter on the length? Where the hell can I get speed bleeders for this? O'rieleys seem to be the only place that carries a metric size. btw, I've seen 27mm, 33mm, and 35mm. Thanks in advance __________________ PIE SAFETY, PIE SAFETY, KNIVES ARE BEST USED FOR WHEN CUTTING UP PASTRY

10-27-2010, 05:11 PM	#3
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	go to dealership and order this Its the bleeder 41128-A0100- __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

10-27-2010, 05:22 PM	#4
joshchewuhh Post Whore! Join Date: Jan 2007 Location: brocal! Posts: 3,681 Trader Rating: (56) Feedback Score: 56 reviews	also if they arnt bleeding right make sure the bleeder is on the top instead of the bottom. __________________

10-28-2010, 10:22 AM	#7
Bumnah Zilvia Member Join Date: Sep 2006 Location: VA Posts: 291 Trader Rating: (4) Feedback Score: 4 reviews	- SPL PARTS __________________ bumnah.com/trakpak

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-27-2010, 04:21 PM	#2
homeslicej2 Zilvia Member Join Date: Aug 2008 Location: Adairsville, GA Age: 41 Posts: 152 Trader Rating: (0) Feedback Score: 0 reviews	Try checking with a local dealership to see what they come up with for the brakes on that particular model. When I checked Courtesyparts.com they only had one part number for the entire model range. You can check with SPLparts or Z1 motorsports as to the proper size/length as well.

10-28-2010, 12:01 PM	#9
homeslicej2 Zilvia Member Join Date: Aug 2008 Location: Adairsville, GA Age: 41 Posts: 152 Trader Rating: (0) Feedback Score: 0 reviews	^the ones they sell are universal for Nissan (and probably others) IIRC. When I got mine they fit my stock S13 calipers I had pulled off, the J30's that I had installed, and the Q45's I had sitting around.