Power Steering+AN Lines + Cooler=Good times! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

180wanabe1 · 01-28-2011, 06:56 PM

Quote:

Originally Posted by MadScientist

OK, I just did this with great results... I used Russell Fittings and Power-Flex Stainless Lines. Waiting to do the Resivor to Rack untill I get a new Resivor and possably a Cooler!

The Smaller Lines on the back side are 12x1.0 to 3AN... which I have yet to find!!

-Drew

earls part number 305-03M121

MadScientist · 02-25-2011, 04:51 PM

Bringing this back from the dead for great reason.

Makers Racing Power Steering Anti-Foaming Kit !!

Looks like an Oil Filter attached to relocation block, but anyway... effective? and I take it this should be on the pressure side?!?

I am litterally about to buy this with a Billion Power Steering Tank!!

-Drew

Drift_This · 02-27-2011, 06:52 PM

I was thinking about gettin this to start my ps cooler setup

KRC High Volume Power Steering Pump Kit - SR20DET [ 20005000/91510 000 ] - Enjuku Racing - Performance Parts and High Quality Fabrication

travypoo · 02-27-2011, 07:15 PM

i did a canton racing alumn PS res along with braided line and AN fittings with a -6 ps cooler from summit. I have the KRC PS pump pictured above also. it is so much better to make your own cooler kit VS buying pre made kits(CB).

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-25-2011, 04:51 PM	#2
MadScientist Zilvia.net Advertiser Join Date: Mar 2003 Location: NOLA Age: 48 Posts: 1,972 Trader Rating: (3) Feedback Score: 3 reviews	Bringing this back from the dead for great reason. Makers Racing Power Steering Anti-Foaming Kit !! Looks like an Oil Filter attached to relocation block, but anyway... effective? and I take it this should be on the pressure side?!? I am litterally about to buy this with a Billion Power Steering Tank!! -Drew

02-27-2011, 06:52 PM	#3
Drift_This Zilvia Addict Join Date: May 2005 Location: Oxnard, CA Age: 40 Posts: 650 Trader Rating: (4) Feedback Score: 4 reviews	I was thinking about gettin this to start my ps cooler setup KRC High Volume Power Steering Pump Kit - SR20DET [ 20005000/91510 000 ] - Enjuku Racing - Performance Parts and High Quality Fabrication

02-27-2011, 07:15 PM	#4
travypoo Zilvia Member Join Date: Jan 2006 Location: Edmonton Alberta Posts: 196 Trader Rating: (0) Feedback Score: 0 reviews	i did a canton racing alumn PS res along with braided line and AN fittings with a -6 ps cooler from summit. I have the KRC PS pump pictured above also. it is so much better to make your own cooler kit VS buying pre made kits(CB).