|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Chat General Discussion About The Nissan 240SX and Nissan Z Cars |
|
|
Thread Tools | Display Modes |
01-30-2011, 11:50 PM
|
#2 |
|
Leaky Injector
|
86.5mm would be oversize pistons since the factory bore is 86.0mm
You would need to bore and hone the block if you wanted to use those pistons. You will need to send it off to a machine shop. Don't be cheap, do it once do it right. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode