Nistune or apex pwr fc

[bardabe]

Originally Posted by cody180sx

I've only had experience with the apexi per fc (on a fully rb25) loved it,only thing is I had a maf set up and I about maxed a z32 maf at 8800 rpm's in first. If your not shooting to make over 550whp a maf set up is the way to go. Maf can make better fine tune adjustments better that map can. If your not shooting for anything around or over that than I say ether is good it would just come down to how much you wanted to spend.

not exactly with nistune we can run a cobra or lightning maf which are good for 700hp.

[surfpac]

Originally Posted by bardabe

not exactly with nistune we can run a cobra or lightning maf which are good for 700hp.

Agreed. if you're planning on running more than 700HP, get a standalone with MAP based. Oh, and make sure the standalone can run a 4 or 5 bar MAP sensor.

[cody180sx]

Originally Posted by bardabe

not exactly with nistune we can run a cobra or lightning maf which are good for 700hp.

Forgot about the cobra Maf. What about the aftermarket mats they make for the cobra's that read way higher than that would they work?