Dont need to be spoon fed!!!!!!

[Mr.B]

ok zilvia, i know this is asked many many times because of all the searches ive done i see the same question but the answer is always so vague. Im
doing a KOUKI 97 sr swap into a 95 (zenki) s14. All i need to find is the pinout for the f4 plug off the sr kouki engine harness. I know im not the only one in the whole entire world that ended up with a kouki sr motor so someone has to have that pinout or figured out a way to do this. please any help would be greatly appreciated. This is all i need to get on the road. Motor is in and everything and im standing outside in the cold waiting for some to reply and im determined to stay out here till i start this car up Please help! This is forum we need to work together lol

[Mr.B]

is anyone out there hello??? its getting colder...

[Om1kron]

here is your spoon. google, brought me back to zilvia.

http://zilvia.net/f/tech-talk/209158...4-chassis.html

[Mr.B]

ugh i have that information sir, but um i need the KOUKI sr F4 pinout not the zenki. That guide shows everything for a zenki sr pinout, but they say that the kouki one is different and comparing my harness with what that diagram says they are different. But thanks for trying....i can give about 20 links of write ups that ive looked at and they are all for zenki srs.

[Om1kron]

I'm pretty sure I have a 97-98 jdm fsm on my computer at home. If I do I will post the pin out. I used it to do my digital climate control.

[Mr.B]

ok bro thanks ill really appreciate it

[Om1kron]

no pin outs of the blacktop f4 plug sorry