engine/engine bay photos

[Wake]

Originally Posted by Flicktitty

Question to those who are deleting/relocating the brake lines from on the firewall, instead of buying the $200 Chase bay's kit, couldn't i just get a few fittings and brake line from auto zone, and bend it in a 90° and go down to the crossmember and then over to where the rest of the lines going to the front passenger wheel and the rear wheels go?

Me and a buddy are going to be doing our own similar kit. I can let you know the specs and products we use if you need.

I was also considering re-routing/making new hardlines. but realized we could do it this way.

[tinys s14]

Originally Posted by WakeBHR

Me and a buddy are going to be doing our own similar kit. I can let you know the specs and products we use if you need.

I was also considering re-routing/making new hardlines. but realized we could do it this way.

if you can do the same for me that would be cool

[h11m1vn]

Originally Posted by WakeBHR

Me and a buddy are going to be doing our own similar kit. I can let you know the specs and products we use if you need.

I was also considering re-routing/making new hardlines. but realized we could do it this way.

How about making a thread about it?

[sftmb]

nothing too fancy... I recently sprayed my type-x S13 in LP2 midnight purple. lol I'll be sure to get better quality pics later when the motor's put in n everything. lol

[Flicktitty]

Originally Posted by WakeBHR

Me and a buddy are going to be doing our own similar kit. I can let you know the specs and products we use if you need.

I was also considering re-routing/making new hardlines. but realized we could do it this way.

Yes that would be great. i'd like to see what you guy's come up with i might try and see what i can do with hardlines