Super hicas removal??????

[DRIFTO16]

oh i see that was very helpfull thnx so basicly

just buy some es bushings?
how much did u get the bushings for?
and how did it work i mean is it completely gone
or is there still a little sketchyness?
just want to make sure this is a complete sucess to cancelling the super hicas problem

[niscur29]

Originally Posted by DRIFTO16

oh i see that was very helpfull thnx so basicly

just buy some es bushings?
how much did u get the bushings for?
and how did it work i mean is it completely gone
or is there still a little sketchyness?
just want to make sure this is a complete sucess to cancelling the super hicas problem

1. I bought the whole kit for the car, but you can buy just the rear arm kit. Google it or contact some vendors here.
2. YES its completely gone, the PS pump is plugged, all the hard lines, junction boxes, etc are off the car.
3. No "sketchyness" if you understand how the rear suspension works and how the tie rod ends work just like toe arms then you will see its the same.
4. This is complete success and then some. The hicas eliminator bar completely disengages the hicas part of the rear suspension. To fully "eliminate everything" you need to remove all of the now useless shit not used after you put in the bar.

Whatever you do please remove all of the lines and associated BS. That shit just looks half assed with the rack gone but all the tubing still in place. Plus once you remove the hardlines down the length of the car you have some extra mounting points to tuck/mount a battery cable to the rear.

[DRIFTO16]

nice =]
so u got rid of your abs and ps?
and replaced it with non hicas ps and non abs or can i still keep it?

[niscur29]

Originally Posted by DRIFTO16

nice =]
so u got rid of your abs and ps?
and replaced it with non hicas ps and non abs or can i still keep it?

I would really recommend searching for some threads on hicas removal. You do not have to get rid of ABS at all. You can keep the PS pump and "modify" it to work. Keep the front steering rack as its better then the non hicas rack. You can install the eliminator bar in an hour or so and modify the pump in about the same time. Once those two are done rear hicas is gone. Then you can take your time removing all the bullshit.

But like others have been recommending man you really need to google it and check out several of the guides etc out there. Get an FSM and READ and understand how the system works and what needs to be removed and what doesnt. Everyone was a NOOB once but no one here is going to hold your hand and walk you through step by step, tool by tool, etc. But if you use whats listed already and search for the rest you should be able to see that its not to hard at all.

First thing is to jack that bitch up and stare at it.