NJ FS: Complete Sr20 Full swap sale - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

eDmSiL80 · 06-07-2011, 07:18 PM

lol who are u? thanks i will RIGHTTT MEOW haha

heres the setup from last year.

here's the turbo kit when i got it

and vidja of it running

biyahh on Vimeo
brap brap on Vimeo

kit comes with everything you need to run it. Turbo lines, wastegate, downpipe, manifold, turbo, etc. I made 280hp on this with a safc. Just need cams and a pfc. easy 380-400hp with a great curve. This is meant for RHD cars only so its mad jdm. but i modified it to clearing the steering rack so your fine. Only downfall is the wastegate sits pretty low. just as close as the steering rack sits. had no problems though.

i literally put only 4 events on this turbo setup. I would like to get $1500 obo for it. I also have a BNIB greddy oil pan and BNIB greddy ebc i can throw in for extra.

eDmSiL80 · 06-07-2011, 07:22 PM

alright. the compression test is no bueno. cylinder four is fairly low. and i ran it just how it was on those videos. so the motor still runs. just not full potential. So my guess it needs some new rings and a rear main seal on the motor. to answer some questions it has a cometic head gasket and stock studs. Had a full refresh about 2 years ago. id like to get $1000 for the whole swap. which includes wiring harness, ecu, motor and trans. lmk. thanks

atomicguy7 · 06-07-2011, 08:23 PM

i want this so bad, if you have in come fall ill take it

eDmSiL80 · 06-07-2011, 09:14 PM

watchu want and can offer

got a z trans adapter kit or good offset 4 lug wheels?

s13silvia123 · 06-07-2011, 09:30 PM

Quote:

Originally Posted by eDmSiL80

lol who are u? thanks i will RIGHTTT MEOW haha

heres the setup from last year.

here's the turbo kit when i got it

kit comes with everything you need to run it. Turbo lines, wastegate, downpipe, manifold, turbo, etc. I made 280hp on this with a safc. Just need cams and a pfc. easy 380-400hp with a great curve. This is meant for RHD cars only so its mad jdm. but i modified it to clearing the steering rack so your fine. Only downfall is the wastegate sits pretty low. just as close as the steering rack sits. had no problems though.

i literally put only 4 events on this turbo setup. I would like to get $1500 obo for it. I also have a BNIB greddy oil pan and BNIB greddy ebc i can throw in for extra.

your secret ninja on facebook LOL

eDmSiL80 · 06-09-2011, 04:15 PM

bump.

Willing to take $1200 for the greddy turbo kit. Scoop up this sweet setup!

06-07-2011, 08:23 PM	#3
atomicguy7 Zilvia Member Join Date: Oct 2009 Location: LI Age: 38 Posts: 250 Trader Rating: (4) Feedback Score: 4 reviews	i want this so bad, if you have in come fall ill take it __________________ Looking for a s13 coupe, in northeast. PM me!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-07-2011, 07:18 PM	#1
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	lol who are u? thanks i will RIGHTTT MEOW haha heres the setup from last year. here's the turbo kit when i got it and vidja of it running biyahh on Vimeo brap brap on Vimeo kit comes with everything you need to run it. Turbo lines, wastegate, downpipe, manifold, turbo, etc. I made 280hp on this with a safc. Just need cams and a pfc. easy 380-400hp with a great curve. This is meant for RHD cars only so its mad jdm. but i modified it to clearing the steering rack so your fine. Only downfall is the wastegate sits pretty low. just as close as the steering rack sits. had no problems though. i literally put only 4 events on this turbo setup. I would like to get $1500 obo for it. I also have a BNIB greddy oil pan and BNIB greddy ebc i can throw in for extra.

06-07-2011, 07:22 PM	#2
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	alright. the compression test is no bueno. cylinder four is fairly low. and i ran it just how it was on those videos. so the motor still runs. just not full potential. So my guess it needs some new rings and a rear main seal on the motor. to answer some questions it has a cometic head gasket and stock studs. Had a full refresh about 2 years ago. id like to get $1000 for the whole swap. which includes wiring harness, ecu, motor and trans. lmk. thanks

06-07-2011, 09:14 PM	#4
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	watchu want and can offer got a z trans adapter kit or good offset 4 lug wheels?

06-09-2011, 04:15 PM	#6
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	bump. Willing to take $1200 for the greddy turbo kit. Scoop up this sweet setup!