DIY Zenki S14 Projector - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RBS14 · 03-03-2004, 10:52 AM

No, i have not done it personally. But i was reading on some lighting forums that people have done it. You have to wetsand with like 1000 grit paper until it all goes away. You don't want to sand with much harsher of a grit because you will get spots on the lens that are thinner than others which will mess up your beam pattern too. Do a search for the clear lenses, there is info on them. Search FA too, there was a group buy on them not too long ago.

03-03-2004, 10:52 AM	#18
RBS14 Nissanaholic! Join Date: Feb 2003 Location: Santa Cruz/San Diego Posts: 2,271 Trader Rating: (0) Feedback Score: 0 reviews	No, i have not done it personally. But i was reading on some lighting forums that people have done it. You have to wetsand with like 1000 grit paper until it all goes away. You don't want to sand with much harsher of a grit because you will get spots on the lens that are thinner than others which will mess up your beam pattern too. Do a search for the clear lenses, there is info on them. Search FA too, there was a group buy on them not too long ago. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode