JDM S14 headlights versus US S14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RBS14 · 03-09-2004, 07:00 PM

Mr.Spool:

to get all of the oxidation out, you have to wetsand the inside of the lenses. It's not that hard, you just put ur headlights in the oven for a couple mins so you can pry the lense off the body of the lamp. Then sand (not too much tho, or you will sand off the "fluting") and polish, and put back together. Save yourself a bunch of skrill yo! I wouldn't sand with anything under like 800 grit, especially when wetsanding because it goes much faster.

03-09-2004, 07:00 PM	#14
RBS14 Nissanaholic! Join Date: Feb 2003 Location: Santa Cruz/San Diego Posts: 2,271 Trader Rating: (0) Feedback Score: 0 reviews	Mr.Spool: to get all of the oxidation out, you have to wetsand the inside of the lenses. It's not that hard, you just put ur headlights in the oven for a couple mins so you can pry the lense off the body of the lamp. Then sand (not too much tho, or you will sand off the "fluting") and polish, and put back together. Save yourself a bunch of skrill yo! I wouldn't sand with anything under like 800 grit, especially when wetsanding because it goes much faster. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode