Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 541 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ILoveMyRHS13 · 08-19-2011, 10:15 AM

Quote:

Originally Posted by atomicguy7

where the 240's at?

In the trash.

axiomatik · 08-19-2011, 10:58 AM

Quote:

Originally Posted by Marcus

uh i clicked the link. those wheels dont fit. looks like someone's trying too hard.

again.

and for some reason, i bet theyre spaced out too. just because he's trying even harder

agreed, ridiculous poke.

Benedict · 08-19-2011, 11:27 AM

More Z's... But less Z33

Closest wheel is 18x12 +0 265/35

PurePontiacKid · 08-19-2011, 11:35 AM

another/older Z maybe?

15x8 -37
15x10 -50
195/50-15 DZ101's

Corbic · 08-19-2011, 12:01 PM

Quote:

Originally Posted by Benedict

More Z's... But less Z33
[

Pffft, Z33 was made for wheel fitment .

Matej · 08-19-2011, 12:10 PM

Quote:

Originally Posted by Corbic

Pffft, Z33 was made for wheel fitment .

No tuck no care.

Slowpez · 08-19-2011, 12:16 PM

Quote:

Originally Posted by Marcus

uh i clicked the link. those wheels dont fit. looks like someone's trying too hard.

again.

and for some reason, i bet theyre spaced out too. just because he's trying even harder

Spaced out too umm no! Lol thanks for your honest opinion though!The car still has to go back to my buddie to pull more n dew bodywerk n all!

Corbic · 08-19-2011, 12:16 PM

Quote:

Originally Posted by Matej

No tuck no care.

Said before, will say it again..

Tucking is for Tranies, not wheels.

Edge of the back wheel should be a few mm from the fender, tire tucking is fine.

deolio · 08-19-2011, 12:58 PM

Quote:

Originally Posted by Corbic

Said before, will say it again..

you also said a lot of dumb shit before so...

19's are so easy to tuck on z's, but everyone is too obsessed with trying to have the lowest offset and widest tires.

19x10 -12 245/35 r
18x9.5 -13 225/40 f

Wake · 08-19-2011, 01:39 PM

Quote:

Originally Posted by deolio

you also said a lot of dumb shit before so...

..........

soreballz · 08-19-2011, 02:50 PM

Quote:

Originally Posted by Slowpez

Spaced out too umm no! Lol thanks for your honest opinion though!The car still has to go back to my buddie to pull more n dew bodywerk n all!

No matter how much "bodywerk" you and your friend "dew", those wheels will never look right on that car. They're simply too large.

chwks13 · 08-19-2011, 03:59 PM

The blue datsun is pretty cool, but not so much that it needs to be posted every 3 pages

/justsayin

helm · 08-19-2011, 04:29 PM

19x9.5 +12 225/35/19 max camber
19x10.5 +12 245/35/19 max camber
Whore'n out another picture because I lowered the rear another 3/4"

***FaLKoN240*** · 08-19-2011, 04:36 PM

Quote:

Originally Posted by helm

19x9.5 +12 225/35/19 max camber
19x10.5 +12 245/35/19 max camber

Don't you feel better now?

helm · 08-19-2011, 04:51 PM

Quote:

Originally Posted by FaLKoN240

Don't you feel better now?

Yes, very much so

frsh4 · 08-19-2011, 04:57 PM

Peer pressure is a motherfucker.

Dummy Ichigawa · 08-19-2011, 05:09 PM

I need a better fucking camera!!!

Rules:
Work Varianza TS1 F:19x9.5+15(225/35's) R:19x10.5+15(245/35's)

EsChassisLove · 08-19-2011, 05:21 PM

Quote:

Originally Posted by axiomatik

agreed, ridiculous poke.

I threw up in my mouth a little bit.

fckillerbee · 08-19-2011, 05:31 PM

^^ car needs sideskirts or something. It just looks funny like that. I like tire and rim poke, but.....there just isn't any flow.

deolio · 08-19-2011, 05:33 PM

Quote:

Originally Posted by frsh4

Peer pressure is a motherfucker.

on zilvia your peers know best.

still think 18's up front would look better.

helm · 08-19-2011, 05:47 PM

Quote:

Originally Posted by deolio

on zilvia your peers know best.

Agreed. Advice, opinions, help, criticism (constructive or not), ideas...these are all the things I have gotten from my peers at Zilvia and am happy to have it.

TsukubaSpec · 08-19-2011, 06:59 PM

removed collars on the rear coil
18x9.5+20
215/35
225/40

!Zar! · 08-19-2011, 07:07 PM

Quote:

Originally Posted by Dummy Ichigawa

I think I was taking swigs of Jameson out of this cars truck on Wednesday.

atomicguy7 · 08-19-2011, 08:27 PM

s2k is nice, duct work ftw lol

GabeS14 · 08-19-2011, 08:38 PM

trying to find some 18/19 staggered on an s14 and search comes up with nothing..any one have any pics?
I like 19's but didnt like the wide 19's in the front, made the front too high off the ground and lot of rubbing in the back of the fender, so thinkign of ordering my new wheels in 18/19..
what do you guys think.

rebornz · 08-19-2011, 08:46 PM

Quote:

Originally Posted by helm

19x9.5 +12 225/35/19 max camber
19x10.5 +12 245/35/19 max camber
Whore'n out another picture because I lowered the rear another 3/4"

you still tryna sell that thing for 12 grand?

frsh4 · 08-19-2011, 08:51 PM

Quote:

Originally Posted by GabeS14

trying to find some 18/19 staggered on an s14 and search comes up with nothing..any one have any pics?
I like 19's but didnt like the wide 19's in the front, made the front too high off the ground and lot of rubbing in the back of the fender, so thinkign of ordering my new wheels in 18/19..
what do you guys think.

18x10 +25 19x10.5 +23

Not the best pic or ride height but this was the first car i saw when i searched.

Edit: Front: 18X9 -22 w/new FM901 225/40/18
Rear: 19X10.5 w/new Continental 255/35/19

cheanyoung · 08-19-2011, 09:24 PM

slopez, a little more fender massaging and drop and it will be good

pictured specs:
19x11-13mm 245/35 achilles
19x13-18mm 305/30 hankooks v12

since this, i've added a 5mm spacer to the fronts and downsized the rear tires to 295/30 hankooks

PurePontiacKid · 08-19-2011, 10:09 PM

Quote:

Originally Posted by chwks13

The blue datsun is pretty cool, but not so much that it needs to be posted every 3 pages

/justsayin

is every page better, then? lololololololololol

^installed camber plates finally, all the way negative just to see how far they go, took out about a degree out of the front after that pic

15x8 -37 (I need wider fronts

)
15x10 -50

huehuehuehuehuehuehue

Royal_T · 08-19-2011, 10:19 PM

Thanks everyone for the kind words about my car.. I will be going back to the all black setup after the build.. new wheels are already done so be on the look out for the new look after the build..

Rules:

08-19-2011, 11:27 AM	#16203
Benedict Zilvia Member Join Date: Oct 2005 Location: Whale's vagina Posts: 225 Trader Rating: (1) Feedback Score: 1 reviews	More Z's... But less Z33 Closest wheel is 18x12 +0 265/35 __________________

08-19-2011, 04:57 PM	#16216
frsh4 Nissanaholic! Join Date: Jul 2009 Location: Long Beach Age: 34 Posts: 1,638 Trader Rating: (17) Feedback Score: 17 reviews	Peer pressure is a motherfucker. __________________ http://thatistupid.tumblr.com/

08-19-2011, 05:09 PM	#16217
Dummy Ichigawa Zilvia Member Join Date: Jun 2006 Location: Sacramento Posts: 230 Trader Rating: (3) Feedback Score: 3 reviews	I need a better fucking camera!!! Rules: Work Varianza TS1 F:19x9.5+15(225/35's) R:19x10.5+15(245/35's) __________________

08-19-2011, 08:27 PM	#16224
atomicguy7 Zilvia Member Join Date: Oct 2009 Location: LI Age: 38 Posts: 250 Trader Rating: (4) Feedback Score: 4 reviews	s2k is nice, duct work ftw lol __________________ Looking for a s13 coupe, in northeast. PM me!

08-19-2011, 08:38 PM	#16225
GabeS14 Post Whore! Join Date: Dec 2005 Location: Sin City Las Vegas Posts: 4,521 Trader Rating: (27) Rides Gallery: GabeS14 Feedback Score: 27 reviews	trying to find some 18/19 staggered on an s14 and search comes up with nothing..any one have any pics? I like 19's but didnt like the wide 19's in the front, made the front too high off the ground and lot of rubbing in the back of the fender, so thinkign of ordering my new wheels in 18/19.. what do you guys think. __________________ E92 M3 19" wheels for sale///JWT Cams and Springs +30whp for sale... cheap.

08-19-2011, 11:35 AM	#16204
PurePontiacKid Zilvia Member Join Date: Dec 2009 Location: Las Vegas Age: 33 Posts: 154 Trader Rating: (1) Feedback Score: 1 reviews	another/older Z maybe? 15x8 -37 15x10 -50 195/50-15 DZ101's

08-19-2011, 03:59 PM	#16212
chwks13 Leaky Injector Join Date: Apr 2010 Location: Houston, BC, Canada Age: 38 Posts: 83 Trader Rating: (0) Feedback Score: 0 reviews	The blue datsun is pretty cool, but not so much that it needs to be posted every 3 pages /justsayin

08-19-2011, 04:29 PM	#16213
helm Join Date: May 2011 Location: Olympia WA Age: 43 Posts: 40 Trader Rating: (0) Feedback Score: 0 reviews	19x9.5 +12 225/35/19 max camber 19x10.5 +12 245/35/19 max camber Whore'n out another picture because I lowered the rear another 3/4"

08-19-2011, 05:31 PM	#16219
fckillerbee Post Whore! Join Date: Nov 2007 Location: Southern California Age: 40 Posts: 4,266 Trader Rating: (5) Feedback Score: 5 reviews	^^ car needs sideskirts or something. It just looks funny like that. I like tire and rim poke, but.....there just isn't any flow.

08-19-2011, 06:59 PM	#16222
TsukubaSpec Zilvia Member Join Date: Mar 2009 Location: Vancouver,ca Posts: 234 Trader Rating: (0) Feedback Score: 0 reviews	removed collars on the rear coil 18x9.5+20 215/35 225/40

08-19-2011, 09:24 PM	#16228
cheanyoung Join Date: Apr 2008 Location: Dallas, TX. Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	slopez, a little more fender massaging and drop and it will be good pictured specs: 19x11-13mm 245/35 achilles 19x13-18mm 305/30 hankooks v12 since this, i've added a 5mm spacer to the fronts and downsized the rear tires to 295/30 hankooks

08-19-2011, 10:19 PM	#16230
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 42 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	Thanks everyone for the kind words about my car.. I will be going back to the all black setup after the build.. new wheels are already done so be on the look out for the new look after the build.. Rules: __________________ http://zilvia.net/advertise.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode