TX $340 shipped 350z track rotor brake setup for 240's - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drftmark · 04-08-2012, 08:35 PM

This is a half complete front brake setup to use a 350z track rotor with a wilwood superlite caliper in the front from the thread seen here silviav8forums.com :: Log in.

The following is all brand new still in packaging never mounted or anything:

Andy's brackets with hardware
raybestos 350z track rotors
wilwood ss lines listed in the thread

All you would need to get is some calipers of your choice and some pads. This is copied from the thread listed above.

Parts Needed for complete setup.

1x 120-7431-R FBSL Caliper, 1.38" pistons, for 1.25" rotor.....$166 w/o shipping
1x 120-7431-L FBSL Caliper, 1.38" pistons, for 1.25" rotor.....$166 w/o shipping
1x 150-8855K BP-10 pads, set of 4...............$66 w/o shipping

*All Wilwood component pricing is from the Summit site.

Everything I have will be $340 shipped.

drftmark · 04-09-2012, 12:51 PM

fixed the pic

g00se · 04-09-2012, 01:39 PM

interested ill pm you when i get off work

drftmark · 04-09-2012, 02:17 PM

Quote:

Originally Posted by g00se

interested ill pm you when i get off work

ok I will clear out my inbox

drftmark · 04-10-2012, 11:42 AM

bumppppppp

drftmark · 04-13-2012, 12:23 PM

$320 shipped

drftmark · 04-18-2012, 05:53 PM

bump message lentgh

drftmark · 04-23-2012, 11:50 PM

$300 shipped is lowest I am going.

drftmark · 04-29-2012, 12:49 PM

Bump, this will cost just ~$20 more than 300zx brake upgrade.... why not go 350z instead!

04-08-2012, 08:35 PM	#1
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	$340 shipped 350z track rotor brake setup for 240's This is a half complete front brake setup to use a 350z track rotor with a wilwood superlite caliper in the front from the thread seen here silviav8forums.com :: Log in. The following is all brand new still in packaging never mounted or anything: Andy's brackets with hardware raybestos 350z track rotors wilwood ss lines listed in the thread All you would need to get is some calipers of your choice and some pads. This is copied from the thread listed above. Parts Needed for complete setup. 1x 120-7431-R FBSL Caliper, 1.38" pistons, for 1.25" rotor.....$166 w/o shipping 1x 120-7431-L FBSL Caliper, 1.38" pistons, for 1.25" rotor.....$166 w/o shipping 1x 150-8855K BP-10 pads, set of 4...............$66 w/o shipping *All Wilwood component pricing is from the Summit site. Everything I have will be $340 shipped.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-09-2012, 12:51 PM	#2
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	fixed the pic

04-09-2012, 01:39 PM	#3
g00se Zilvia Junkie Join Date: Aug 2008 Location: CA Posts: 383 Trader Rating: (7) Feedback Score: 7 reviews	interested ill pm you when i get off work

04-10-2012, 11:42 AM	#5
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	bumppppppp

04-13-2012, 12:23 PM	#6
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	$320 shipped

04-18-2012, 05:53 PM	#7
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	bump message lentgh

04-23-2012, 11:50 PM	#8
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	$300 shipped is lowest I am going.

04-29-2012, 12:49 PM	#9
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	Bump, this will cost just ~$20 more than 300zx brake upgrade.... why not go 350z instead!