Tennessee people speak up!!!

[I'm Redline]

ran into a kid with a black '96 240 like mine yesterday who said there were a few guys who hung out, but what I am looking at is a real deal, club that will be able to get group discounts, etc so the cars will be be the focus and anything from stock sleepers to kitted out track whores will be welcome...no beat up crap, no dented up ragged out stuff(of course this will be fine for a new entry who is working on it)

clarksville, TN cars & trucks - all classifieds "240SX" - craigslist

Some stuff locally, but I think the RB20 car in two adds is the same one...be weary of that one, it has been beat on hard and will need a lot of work. If the one with 'rod knock' is being DD, that means that motor may well end up with a serious hole in the block and major catastrophic failure without a bottom end rebuild(and of course that means since it's taken apart the top end gets refreshed too ) I found mine on Craig's List from a GI who was leaving town and have tint and paint to go, but my paint isn't too bad, just the normal peels and stuff

[grimm199]

Originally Posted by I'm Redline

ran into a kid with a black '96 240 like mine yesterday who said there were a few guys who hung out, but what I am looking at is a real deal, club that will be able to get group discounts, etc so the cars will be be the focus and anything from stock sleepers to kitted out track whores will be welcome...no beat up crap, no dented up ragged out stuff(of course this will be fine for a new entry who is working on it)

clarksville, TN cars & trucks - all classifieds "240SX" - craigslist

Some stuff locally, but I think the RB20 car in two adds is the same one...be weary of that one, it has been beat on hard and will need a lot of work. If the one with 'rod knock' is being DD, that means that motor may well end up with a serious hole in the block and major catastrophic failure without a bottom end rebuild(and of course that means since it's taken apart the top end gets refreshed too ) I found mine on Craig's List from a GI who was leaving town and have tint and paint to go, but my paint isn't too bad, just the normal peels and stuff

Hey that was me! I thought I recognised the username. I actually saw your car parked at Walmart earlier today. Lol I felt like a stalker. I know there is a drift S13 with a KA-T and another guy named Will with the S15 front end conversion with a KA-T too. Then I have seen that white one with the RB20 few times. Here's mine. Took this one about a week ago by a guy I work with.

[jimmypage4ever]

Originally Posted by grimm199

Hey that was me! I thought I recognised the username. I actually saw your car parked at Walmart earlier today. Lol I felt like a stalker. I know there is a drift S13 with a KA-T and another guy named Will with the S15 front end conversion with a KA-T too. Then I have seen that white one with the RB20 few times. Here's mine. Took this one about a week ago by a guy I work with.

Is the will guy's a white s14.5 and used to have purple wheels? ive hear of him through a friend of mineif so. Im looking to get a S14 just saw one for four grand on cl completely stock but im stuck paying payments on a 11 Slowstang until i start my new job next month. Any safeplaces to go drifting without getting busted?

[jimmypage4ever]

Originally Posted by I'm Redline

ran into a kid with a black '96 240 like mine yesterday who said there were a few guys who hung out, but what I am looking at is a real deal, club that will be able to get group discounts, etc so the cars will be be the focus and anything from stock sleepers to kitted out track whores will be welcome...no beat up crap, no dented up ragged out stuff(of course this will be fine for a new entry who is working on it)

clarksville, TN cars & trucks - all classifieds "240SX" - craigslist

Some stuff locally, but I think the RB20 car in two adds is the same one...be weary of that one, it has been beat on hard and will need a lot of work. If the one with 'rod knock' is being DD, that means that motor may well end up with a serious hole in the block and major catastrophic failure without a bottom end rebuild(and of course that means since it's taken apart the top end gets refreshed too ) I found mine on Craig's List from a GI who was leaving town and have tint and paint to go, but my paint isn't too bad, just the normal peels and stuff

Sweet man that would be pretty sweet to get a group started like that. Hoping to pick up a stock s14 and just order an bunch of parts online. Really wanting to get suspension,wheels,lsd, and paint if i get a body kit, then would like to put some serious money to throw down on a new motor or just build up the ka.

[I'm Redline]

Originally Posted by jimmypage4ever

Sweet man that would be pretty sweet to get a group started like that. Hoping to pick up a stock s14 and just order an bunch of parts online. Really wanting to get suspension,wheels,lsd, and paint if i get a body kit, then would like to put some serious money to throw down on a new motor or just build up the ka.

I been drooling over Enjuku's site. Stuff is good, and inexpensive. I think I can do brake upgrades(screw big brakes, don't need them), Stage I coil overs(adjustable for ride height, and dampening), bushings and suspension arms, and a cold air intake for under $1.5k. That's not bad. RS Enthalpy tune set up, well, the $499 is damn well worth it when bolt on upgrades are all that is being done. For further bottom end or top end work, RSE upgrades for a one time rate of $150. Not bad considering that real hp is made from a computer's input and not some greasemonkey like me tweaking points and carbs, or putting fat wires and non resistor plugs into a $500hp into a 2800 pound 1966 Mustang(The REAL Mustang, not some piggesh 3500 pound wannabe)(mine is currently undergoing restomod in Nor-Cal by my Pop)