|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
|
Thread Tools | Display Modes |
06-30-2012, 09:54 AM
|
#15 | |
|
The Architect.
 
Join Date: May 2006
Location: Los Angeles, CA
Posts: 11,535
Trader Rating: (392)
  Feedback Score: 392 reviews
|
On OEM Sideskirts, there are supposed to be tabs like this attached from the inside:
 It sandwiches/clips onto the chassis itself and screws on to the left of it (which is why the holes on the rear section of OEM sideskirts is off to the side). It is only meant to hold the sideskirt in place. You still need to run a strip of double sided tape along the lower rocker panel to keep it firmly in place. Most people don't include these and do what has been mentioned above. You can drill new holes and bolt them up that way, but if you're picky like I am, you'll either source the metal tabs or make your own. Hope that helps.
__________________
 -Jspec- Instagram/CrimsonRockett Quote:
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode