ISIS parts

[Legoctf]

I run their single can gt exhaust(s13), fits awesome and sounds great.
I also have their coilovers and they are great. Dailying on them as well drifting on.

Would definitely recommend to anyone looking to pick up coils and does have the money for higher end stuff. Plus the guys at enjuku are awesome and will help you out if you run into a problem.

[NoPistons!]

To be quite honest i'd be comfortable running any of their parts. Even their boost parts. Of course people are gonna talk shit. Fuck em. If you want to walk around like a giant vagina your whole life and run stock shit and save save save go ahead and not buy them...... I bet lots of people have shitloads of fun with their isis parts. SHITLOADS.

[240zach]

so the point of this thread is to run spl parts? lolol

[melikepaint]

opinions are like assholes...

[Renelovesnike]

Originally Posted by ixfxi

you.......... fucking............. tool



there is a difference between a nice looking weld and a good weld. the problem with products like these, is that there is no way to know what you're purchasing - you're constantly rolling the dice. when i take my car up to a canyon road or am doing 100+ mph, i dont rely on questionable car - i rely on one that is built durable. i dont like knowing that at any given point in time, a fucking part can fail.

whats what these products are, fail products. products that equate low price into questionability and risk. and to you fucking idiots, everything is fine as long as it works. but once it fails, then you're like "damn, i should've spent the extra coin"

brake lines...... why dont you make a post when a brake line fails, you fucking toolbox. then you can tell me how much value you have in that product.

i think i paid under 100 yesterday for goodridge lines w/ reusable aeroquip connectors. gee, lets not go overboard and spend too much money on 4 SS lines... i mean, 100 bucks is REALLY pushing my budget.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiidiots

Wow man your taking everything wayy to serious! i have never heard of steel braided lines failing and its obveous ass fuck just by looking on the bite of the welds theres good penetration on the exhaust! Not too cold on the welds at all and not running the welds too hot! Go get laid and stop giving a fuck so often! ull be much happyer.

ohhh you kids


so sweet


whats life like when you're hustling to buy cheapass parts. god forbid we save money and purchase some good parts... parish the thought!

[redhatchy92]

how's the fitment on their v2 manifold for a KA-T. i got one and it looks like the first runner is really close to the turbo inlet.

[illvialuver]

too serious.

to serious would imply that ifxi is also named serious.

I just hate the fact that everything they sell is a copy of some other companies product that they had to develop.

i just hate the fact that all these products are fucking JUNK


i love however, knowing that 99% of the people on zilvia own this shit. makes me feel so fucking SUPERIOR

[whitenoise]

Originally Posted by nield13

i bought their tubular bottom mount manifold, looked great but only supports t25 and t28 applications, had to get rid of it because it wouldn't fit my tomei turbo

what tomei turbo r u trying to use and what engine tomei turbo is OEM replacement with t2 flange. how did urs didnt fit ? ka or sr? im about to get a tomei m8270 for my KA-T with the isis V2 manifold. its good to know before i spend the money.

[Csomme]

Originally Posted by ixfxi

i just hate the fact that all these products are fucking JUNK


i love however, knowing that 99% of the people on zilvia own this shit. makes me feel so fucking SUPERIOR

What makes you superior? lol.

Grow the fuck up. People are going to buy whatever they want, you sounding like a bitch every 30 seconds on Zilvia isn't going to change anyones mind about ISIS, just about how big of a whiny bitch you are.

[omgRWDgoodness!]

Originally Posted by blessedhellrider

search option sucks!!!

Thank you for speaking for pretty much every dumb, clueless, lazy goddamn newb on this forum. If only the rest of them could figure out how to be as straightforward as you...

[memphis180sx]

Theres alot of compairing apples to walnuts in here isis is a good cheap brand ive bought both name brand and isis yes the quality is diffrent but what do u expect. get over it there will always be copys of something im pretty sure theres copys of every thing u buy daily.

[mikenike974]

im running their coilovers on my s13, maxed out on 17's and its plenty low, pignose lip was scrapin on the freeway changin lanes. ride quality is awesome for dailying too, rides very smooth through the streets of downtown but is nice and stiff through drifts. for the price you cant beat it ($779 shipped from enjuku) also you will notice how enjuku doesnt sell any godspeed or other noname bullshit coils, if a site like enjuku backs it then i say go for it, i have no complaints

[xoxide]

I ordered their braided clutch line (didnt think you could really build a shitty braided line), well I was wrong. Hooked it up, went to bleed the clutch and their was a giant leak near the fitting. Ended up buying some brake line from oreilly's instead.

I will never buy an Isis part again.

[Renelovesnike]

Originally Posted by xoxide

I ordered their braided clutch line (didnt think you could really build a shitty braided line), well I was wrong. Hooked it up, went to bleed the clutch and their was a giant leak near the fitting. Ended up buying some brake line from oreilly's instead.

I will never buy an Isis part again.

Damn right when i was about to pick up an isis front steel braided "looks like ya can fuck up such an easy thing" , looks like im going spl

[ILoveJDM]

bought a set of their turbo lines a few years ago, the black ones. didnt realize they werent actually STAINLESS BRAIDED, they were like some black fabric and regular rubber hose under it. found out the hard way when the line was resting slightly near my turbo and it burned through the fabric stuff and ate the hose...started pissing coolant everywhere. i guess thats why ISIS came out with ACTUAL STAINLESS BRAIDED lines now...

after that i wouldnt buy shit for them, cutting corners on something like that just shows me that if theyre willing to cut corners on some turbo lines, i would be scared to even buy anything else.

[Hoffman5982]

Originally Posted by ILoveJDM

bought a set of their turbo lines a few years ago, the black ones. didnt realize they werent actually STAINLESS BRAIDED, they were like some black fabric and regular rubber hose under it. found out the hard way when the line was resting slightly near my turbo and it burned through the fabric stuff and ate the hose...started pissing coolant everywhere. i guess thats why ISIS came out with ACTUAL STAINLESS BRAIDED lines now...

after that i wouldnt buy shit for them, cutting corners on something like that just shows me that if theyre willing to cut corners on some turbo lines, i would be scared to even buy anything else.

That's not cutting corners. That's black nylon braided hose, which(opinion) looks better than ss lines and actually costs more. A ss line would also eat through if it was resting against something. It's your fault for not making sure the lines weren't rubbing. Broadfield had all Nylon Braided lines on his SR setup and never had a problem.

[MedHat240sx]

i have a isis exhaust fitment is AWESOME sounds AWESOME but gets a bit of rust on it easy nothing to bad though

[vehicle336]

Originally Posted by ixfxi

you.......... fucking............. tool

its similar to B&M? its a fucking COPY of the B&M. i've had the B&M on my car since the `90s....... funny to see companies replicate shit, and here we are years later and people are like "duuh its SIMILAR"

COPY

get it straight......................




there is a difference between a nice looking weld and a good weld. the problem with products like these, is that there is no way to know what you're purchasing - you're constantly rolling the dice. when i take my car up to a canyon road or am doing 100+ mph, i dont rely on questionable car - i rely on one that is built durable. i dont like knowing that at any given point in time, a fucking part can fail.

whats what these products are, fail products. products that equate low price into questionability and risk. and to you fucking idiots, everything is fine as long as it works. but once it fails, then you're like "damn, i should've spent the extra coin"

brake lines...... why dont you make a post when a brake line fails, you fucking toolbox. then you can tell me how much value you have in that product.

i think i paid under 100 yesterday for goodridge lines w/ reusable aeroquip connectors. gee, lets not go overboard and spend too much money on 4 SS lines... i mean, 100 bucks is REALLY pushing my budget.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiidiots

QFT.

I have so many things I want to say in this thread, but I'll just go ahead and put this back up here. Just because it's popular, doesn't make it right.

[pancakes562]

ISIS parts = suck

[s0fa king]

Originally Posted by ixfxi

i just hate the fact that all these products are fucking JUNK


i love however, knowing that 99% of the people on zilvia own this shit. makes me feel so fucking SUPERIOR

fucking love this guy! I'd love to buy you a beer.

[240zach]

^ ship it to him. lol you won't

[Tle1993]

Originally Posted by s0fa king

fucking love this guy! I'd love to buy you a beer.

im with you! on that on man lol haha

[AsleepAltima]

ive said it before and ill say it again - many of these parts are made by the same fucking manufacturer and labeled as someone elses. plain and simple. they do it with coil springs, radiators, intercooler and believe it or not - suspension parts. do you honestly think that EVERY "manufacturer" can afford to do everything they supposedly say they do?
get real. do some research and youll see what i mean. its the same thing for tools - ever wonder why masterbuilt look like snap on and yet others look like craftsman? same manufacturer, different label.

if it makes you feel better to buy an intercooler that has a stencil on it saying, "mishimoto" or "hks" because its "better" than cxracing, then so be it. but ill bet dollars to donuts that the same manufacturer is making some of your beloved parts and selling them to the next highest bidder.

[Promise Land]

I have their KA radiator, dual cooling fan set-up, and suspension arms. I haven't had any problems with any of the items yet.

[tricky_ab]

So this thread is actually a cheap ass defense force?

[xoxide]

Originally Posted by Hoffman5982

That's not cutting corners. That's black nylon braided hose, which(opinion) looks better than ss lines and actually costs more. A ss line would also eat through if it was resting against something. It's your fault for not making sure the lines weren't rubbing. Broadfield had all Nylon Braided lines on his SR setup and never had a problem.

Actually, the black braided line (atleast the good quality stuff) is braided carbon fiber, not nylon. Its much stronger, looks cleaner, and doesnt chew through paint and stuff that it rubs against like youve said. We run it on the racecar for those exact purposes. Isis just plain sucks.

[xoxide]

Originally Posted by AsleepAltima

if it makes you feel better to buy an intercooler that has a stencil on it saying, "mishimoto" or "hks" because its "better" than cxracing, then so be it. but ill bet dollars to donuts that the same manufacturer is making some of your beloved parts and selling them to the next highest bidder.

And you must be fucking stupid... Yes you are correct in a sense that Megan, Isis, Godspeed, and maybe even some other brands such as stance, etc. All get their coils from the same place. However, if you think HKS parts are made in the same factory as CX Racing, your delusional. The diffrence is HKS, Mishimoto, Etc. Do in house R&D, tuning, and tweaking of their products. Godspeed, CX, Isis just knock off what the good companies are building, they do no R&D, and do not care if it only lasts a few hundred miles.

[stevecorrado88]

Originally Posted by chetos13

I got the oil pan it fit horrible took me two hours to grind down the extra metal and the bolts were a pain to line up and leaks like crazy

It took me 5 min to grind the notch off. If u do your research before u buy the part it tells u that it needs to be done. Not a big deal, I've had the oil Pan on 2 different cars works great.