Maximum TIRE(Rubber) fitment thread

[Black R]

Originally Posted by JFoxx

Thanks....they are 50mm rears... I got lucky with my wheel measurments...if the were even 5mm offset off either direction they wouldn't fit.....

I looked online... I can't find anyone else with 335's on an s13....

How bad did you have to bow those rear overs?

I have some 50mm rear overs to install, and I'm thinking about going 18x12 in zero offset, so I'd have to bow another 20mm out to get 335's under there.

How much clearance do you have inboard?
Was it only 5mm? And was that to the coils or what?

[JFoxx]

Originally Posted by Black R

How bad did you have to bow those rear overs?

I have some 50mm rear overs to install, and I'm thinking about going 18x12 in zero offset, so I'd have to bow another 20mm out to get 335's under there.

How much clearance do you have inboard?
Was it only 5mm? And was that to the coils or what?

they are kts coilovers, i have probably about 10mm clearance on the inside. i didnt have to bow the overs that much at all, but i did have to shave the lip off of them.....

at a zero offset i dont think youl be able to tuck 335's with a 50mm over. unless your trying to seriously bow your overfenders out, and i think it wouldnt look good.....