IL Garrett GT2860RS/External Gate Manifold - 1,130.00 Shipped! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hobbs · 10-10-2012, 10:20 AM

Selling the entire turbo setup off my SR, price is 1,130.00 shipped and paypal'd to the lower 48.

Turbo:
The turbo is a genuine Garrett GT2860RS with a .86 T2 housing with the internal flapper welded shut. Comes with the 3" intake and 2" outlet on the compressor housing which has been powdered coated gloss black. The turbo has roughly about 4,300 miles on it since it was purchased new a year and a half ago. With an external gated setup this turbo is proven to exceed Garrett's listed power limits and with a properly setup engine you will be able to see upper 300's with this setup. On my P11 it made 307fwhp @ 10 psi with S4 cams and on a RWD SR with stock cams made 314 @ 13psi.

Manifold:
This is a stock S13 SR20DET manifold which has been modified by CodyAce to use a Tial MV-S 38mm wastegate. Rock solid boost control along with a pretty awesome sound to go along with it. Brand new OEM Nissan gaskets were used and are still good. This setup was only ran for 1,300 miles before it was pulled off of the engine.

Extras:
Included in my asking price is a couple extra bits which will allow you to bolt this up to your motor.

- DIF Braided oil and coolant lines for S13 SR
- OEM Nissan SR heatshield modified for external gate
- Dump tube for the Tial MV-S
- Extra Tial springs for the MV-S for your boost pressure goal

Rundown of what you're buying:
- GT2860RS T2 .86 Exhaust housing
- CodyAce modified manifold with modified heatshield
- Tial MV-S 38mm Vband wastegate with dump tube
- DIF S13 SR turbo oil and coolant lines
- Correct .035 oil restrictor for GT ball bearing turbos
- Tial box with extra boost pressure springs

Zenk1_love · 10-10-2012, 11:17 AM

Willing to part just the turbo?

hobbs · 10-10-2012, 11:24 AM

Sure, shoot me a PM.

EsChassisLove · 10-10-2012, 11:29 AM

Pics of the heat shield? I have the same set up but my EWG might be an inch or so in a different spot.

hobbs · 10-10-2012, 11:30 AM

It's just been trimmed close to the wastegate. I'll get a picture for you later on tonight.

MrChow · 10-10-2012, 11:37 AM

UGH.. I want the whole thing but I need to sell stuff. FML why are there soo many cool stuff going around now!

hobbs · 10-14-2012, 02:22 PM

Last bump!

10-10-2012, 10:20 AM	#1
hobbs Nissanaholic! Join Date: Aug 2010 Location: Under a rock Posts: 2,264 Trader Rating: (43) Feedback Score: 43 reviews	Garrett GT2860RS/External Gate Manifold - 1,130.00 Shipped! Selling the entire turbo setup off my SR, price is 1,130.00 shipped and paypal'd to the lower 48. Turbo: The turbo is a genuine Garrett GT2860RS with a .86 T2 housing with the internal flapper welded shut. Comes with the 3" intake and 2" outlet on the compressor housing which has been powdered coated gloss black. The turbo has roughly about 4,300 miles on it since it was purchased new a year and a half ago. With an external gated setup this turbo is proven to exceed Garrett's listed power limits and with a properly setup engine you will be able to see upper 300's with this setup. On my P11 it made 307fwhp @ 10 psi with S4 cams and on a RWD SR with stock cams made 314 @ 13psi. Manifold: This is a stock S13 SR20DET manifold which has been modified by CodyAce to use a Tial MV-S 38mm wastegate. Rock solid boost control along with a pretty awesome sound to go along with it. Brand new OEM Nissan gaskets were used and are still good. This setup was only ran for 1,300 miles before it was pulled off of the engine. Extras: Included in my asking price is a couple extra bits which will allow you to bolt this up to your motor. - DIF Braided oil and coolant lines for S13 SR - OEM Nissan SR heatshield modified for external gate - Dump tube for the Tial MV-S - Extra Tial springs for the MV-S for your boost pressure goal Rundown of what you're buying: - GT2860RS T2 .86 Exhaust housing - CodyAce modified manifold with modified heatshield - Tial MV-S 38mm Vband wastegate with dump tube - DIF S13 SR turbo oil and coolant lines - Correct .035 oil restrictor for GT ball bearing turbos - Tial box with extra boost pressure springs

10-10-2012, 11:29 AM	#4
EsChassisLove Nissanaholic! Join Date: Jan 2011 Location: San Diego Age: 36 Posts: 2,090 Trader Rating: (26) Feedback Score: 26 reviews	Pics of the heat shield? I have the same set up but my EWG might be an inch or so in a different spot. __________________ IG/TikTok-ThatS14_Z06guy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-10-2012, 11:17 AM	#2
Zenk1_love Leaky Injector Join Date: Jul 2010 Location: CHS Age: 33 Posts: 83 Trader Rating: (2) Feedback Score: 2 reviews	Willing to part just the turbo?

10-10-2012, 11:24 AM	#3
hobbs Nissanaholic! Join Date: Aug 2010 Location: Under a rock Posts: 2,264 Trader Rating: (43) Feedback Score: 43 reviews	Sure, shoot me a PM.

10-10-2012, 11:30 AM	#5
hobbs Nissanaholic! Join Date: Aug 2010 Location: Under a rock Posts: 2,264 Trader Rating: (43) Feedback Score: 43 reviews	It's just been trimmed close to the wastegate. I'll get a picture for you later on tonight.

10-14-2012, 02:22 PM	#7
hobbs Nissanaholic! Join Date: Aug 2010 Location: Under a rock Posts: 2,264 Trader Rating: (43) Feedback Score: 43 reviews	Last bump!