SR20det: is there anyboy that makes a hard intake pipe? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

robs240sx · 07-09-2004, 02:22 AM

I am making one out mandrel bent 3" steel pipes. I will have it done in a couple of days (cause i have a day job). I will test it for at least a week and post the gains if any. it is going to be made for a 97 240sx with a s13 redtop. the s14 with a s14 SR should be slightly different due to the location of the turbo to the chassi, the same goes for the s13 with s13 SR, but it shouldn't be any more than a rubber coupling could fix.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

07-09-2004, 02:22 AM	#19
robs240sx Join Date: Dec 2003 Location: Houston, TX Age: 48 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	I am making one out mandrel bent 3" steel pipes. I will have it done in a couple of days (cause i have a day job). I will test it for at least a week and post the gains if any. it is going to be made for a 97 240sx with a s13 redtop. the s14 with a s14 SR should be slightly different due to the location of the turbo to the chassi, the same goes for the s13 with s13 SR, but it shouldn't be any more than a rubber coupling could fix.