![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Zilvia Member
![]() |
I just picked up a compression tester. I will post results shortly.
I shouldn't have any air leaks, everything is plugged and such. The cams weren't out. It is "new" in that the motor that came in the car was shot, I got a KA that was pulled from an Auto coupe with 100k miles. It was supposedly a good running motor when pulled. It sat for 6 months before I bought it. When pulled, the seller swears it had no valvetrain noises or anything. I took out the chain guide from the valvecover and the chain guide from the front cover(apprently this is even a recall by nissan, so I doubt I did anything wrong?). I will have to find my set of feeler guages and check shim clearances too. Thanks Brian and F3600!
__________________
1996 Maxima 5 speed 1993 Altima SE ------------------------- 1993 240sx Base - SOLD [Blacktop and such] 1992 240sx Base - SOLD [Road Race/Auto X Beast] 1993 240sx Hicas - SOLD 2001 Xterra SE V6 4x4 5 speed - SOLD |
![]() |
![]() |
Sponsored Links |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|