17x9 35 offset on an S-13 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

turbo240sx · 07-23-2004, 08:27 AM

anyone run a 17x9 on the rear of an s-13? i just got some and before i put the tire on the rim, id like to know if it will fit right or if i need to roll the fender. any one who has this setup please give some input. thanks.

Racer X · 07-23-2004, 09:25 AM

i have 17x9 with 255/40 tire very slight rub in very hard corners. a small amount of fender rolling will fix it but remember it also matter what camber numers you run. i think was at -1.5

turbo240sx · 07-23-2004, 09:40 AM

i corrected my camber to stock setting from lowering the car. so in my case it might not fit as well as yours, damn it!!! thanks for the info.

kingsol · 07-23-2004, 11:09 AM

i've heard of people having a lower offset without rolling their fender. just run smaller tires if you get some rub

07-23-2004, 08:27 AM	#1
turbo240sx Zilvia Member Join Date: Oct 2002 Location: CT Posts: 166 Trader Rating: (0) Feedback Score: 0 reviews	17x9 35 offset on an S-13 anyone run a 17x9 on the rear of an s-13? i just got some and before i put the tire on the rim, id like to know if it will fit right or if i need to roll the fender. any one who has this setup please give some input. thanks. __________________ 240sx s-13 TURBO weekend v-8 killer 90 Talon TSI WARNING.THIS CAR IS EQUIPPED WITH A TURBOCHARGER. DUE TO POSSIBLE BREATHING PROBLEMS UNDER HEAVY ACCELERATION, ALL FEMALES ARE ADVISED TO REMOVE ANY TIGHT FITTING OR RESTRICTIVE CLOTHING FOR SAFETY.

07-23-2004, 09:25 AM	#2
Racer X Zilvia Junkie Join Date: Apr 2002 Location: brooklyn park Age: 41 Posts: 334 Trader Rating: (2) Feedback Score: 2 reviews	i have 17x9 with 255/40 tire very slight rub in very hard corners. a small amount of fender rolling will fix it but remember it also matter what camber numers you run. i think was at -1.5 __________________ Twin67 ls1/awd in the works

07-23-2004, 09:40 AM	#3
turbo240sx Zilvia Member Join Date: Oct 2002 Location: CT Posts: 166 Trader Rating: (0) Feedback Score: 0 reviews	i corrected my camber to stock setting from lowering the car. so in my case it might not fit as well as yours, damn it!!! thanks for the info. __________________ 240sx s-13 TURBO weekend v-8 killer 90 Talon TSI WARNING.THIS CAR IS EQUIPPED WITH A TURBOCHARGER. DUE TO POSSIBLE BREATHING PROBLEMS UNDER HEAVY ACCELERATION, ALL FEMALES ARE ADVISED TO REMOVE ANY TIGHT FITTING OR RESTRICTIVE CLOTHING FOR SAFETY.

07-23-2004, 11:09 AM	#4
kingsol Zilvia FREAK! Join Date: Jun 2003 Location: Berkeley/San Francisco Posts: 1,435 Trader Rating: (0) Feedback Score: 0 reviews	i've heard of people having a lower offset without rolling their fender. just run smaller tires if you get some rub __________________ There is a time in every man's education when he arrives at the conviction that envy is ignorance; that imitation is suicide; that he must take himself for better for worse as his portion; that though the wide universe is full of good, no kernel of nourishing corn can come to him but through his toil bestowed on that plot of ground which is given to him to till. -Emerson

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode